* remove unused macros
* remove unused macro values
* align tabs
* remove Free Software Foundation address

Signed-off-by: Andreas Müller <schnitzelt...@gmx.de>
---
 include/configs/omap3_overo.h |   69 ++++++++++++++++++----------------------
 1 files changed, 31 insertions(+), 38 deletions(-)

diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 79eb466..8f2e69d 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -13,8 +13,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * Foundation, Inc.
  */
 
 #ifndef __CONFIG_H
@@ -23,41 +22,41 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP            1       /* in a TI OMAP core */
-#define CONFIG_OMAP34XX                1       /* which is a 34XX */
-#define CONFIG_OMAP3_OVERO     1       /* working with overo */
+#define CONFIG_OMAP                            /* in a TI OMAP core */
+#define CONFIG_OMAP34XX                                /* which is a 34XX */
+#define CONFIG_OMAP3_OVERO                     /* working with overo */
 
-#define CONFIG_SDRC    /* The chip has SDRC controller */
+#define CONFIG_SDRC                            /* The chip has SDRC controller 
*/
 
-#include <asm/arch/cpu.h>      /* get chip and board defs */
+#include <asm/arch/cpu.h>                      /* get chip and board defs */
 #include <asm/arch/omap3.h>
 
 /*
  * Display CPU and Board information
  */
-#define CONFIG_DISPLAY_CPUINFO         1
-#define CONFIG_DISPLAY_BOARDINFO       1
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
 
 /* Clock Defines */
 #define V_OSCK                 26000000        /* Clock output from T2 */
 #define V_SCLK                 (V_OSCK >> 1)
 
-#undef CONFIG_USE_IRQ          /* no support for IRQs */
+#undef CONFIG_USE_IRQ                          /* no support for IRQs */
 #define CONFIG_MISC_INIT_R
 
-#define CONFIG_CMDLINE_TAG             1       /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS       1
-#define CONFIG_INITRD_TAG              1
-#define CONFIG_REVISION_TAG            1
+#define CONFIG_CMDLINE_TAG                     /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
 
-#define CONFIG_OF_LIBFDT               1
+#define CONFIG_OF_LIBFDT
 
 /*
  * Size of malloc() pool
  */
-#define CONFIG_ENV_SIZE                        (128 << 10)     /* 128 KiB */
+#define CONFIG_ENV_SIZE                (128 << 10)     /* 128 KiB */
                                                /* Sector */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (128 << 10))
+#define CONFIG_SYS_MALLOC_LEN  (CONFIG_ENV_SIZE + (128 << 10))
 
 /*
  * Hardware drivers
@@ -66,7 +65,7 @@
 /*
  * NS16550 Configuration
  */
-#define V_NS16550_CLK                  48000000        /* 48MHz (APLL96/2) */
+#define V_NS16550_CLK          48000000        /* 48MHz (APLL96/2) */
 
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
@@ -85,13 +84,10 @@
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600, \
                                        115200}
-#define CONFIG_GENERIC_MMC             1
-#define CONFIG_MMC                     1
-#define CONFIG_OMAP_HSMMC              1
-#define CONFIG_DOS_PARTITION           1
-
-/* DDR - I use Micron DDR */
-#define CONFIG_OMAP3_MICRON_DDR                1
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
 
 /* commands to include */
 #include <config_cmd_default.h>
@@ -113,31 +109,29 @@
 #define CONFIG_CMD_NET         /* bootp, tftpboot, rarpboot    */
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C                        1
+#define CONFIG_HARD_I2C
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_I2C_SLAVE           1
-#define CONFIG_SYS_I2C_BUS             0
-#define CONFIG_SYS_I2C_BUS_SELECT      1
-#define CONFIG_I2C_MULTI_BUS           1
-#define CONFIG_DRIVER_OMAP34XX_I2C     1
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_DRIVER_OMAP34XX_I2C
 
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_POWER           1
-#define CONFIG_TWL4030_LED             1
+#define CONFIG_TWL4030_POWER
+#define CONFIG_TWL4030_LED
 
 /*
  * Board NAND Info.
  */
-#define CONFIG_SYS_NAND_QUIET_TEST     1
+#define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR           NAND_BASE       /* physical address */
                                                        /* to access nand */
 #define CONFIG_SYS_NAND_BASE           NAND_BASE       /* physical address */
                                                        /* to access nand */
                                                        /* at CS0 */
-#define GPMC_NAND_ECC_LP_x16_LAYOUT    1
+#define GPMC_NAND_ECC_LP_x16_LAYOUT
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1       /* Max number of NAND */
                                                /* devices */
@@ -249,7 +243,6 @@
  */
 #define CONFIG_NR_DRAM_BANKS   2       /* CS1 may or may not be populated */
 #define PHYS_SDRAM_1           OMAP34XX_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE      (32 << 20)      /* at least 32 MiB */
 #define PHYS_SDRAM_2           OMAP34XX_SDRC_CS1
 
 /*-----------------------------------------------------------------------
@@ -272,7 +265,7 @@
 #define CONFIG_SYS_MONITOR_BASE                CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_ONENAND_BASE                ONENAND_MAP
 
-#define CONFIG_ENV_IS_IN_NAND          1
+#define CONFIG_ENV_IS_IN_NAND
 #define ONENAND_ENV_OFFSET             0x240000 /* environment starts here */
 #define SMNAND_ENV_OFFSET              0x240000 /* environment starts here */
 
@@ -286,9 +279,9 @@
  *----------------------------------------------------------------------------
  */
 
-#define CONFIG_SMC911X         1
+#define CONFIG_SMC911X
 #define CONFIG_SMC911X_32_BIT
-#define CONFIG_SMC911X_BASE     0x2C000000
+#define CONFIG_SMC911X_BASE            0x2C000000
 
 #endif /* (CONFIG_CMD_NET) */
 
-- 
1.7.4.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to