V1 -> V2 * cleanups: replace printf with one argument by puts [1-2] * cleanups: remove unused macros and macro values / tabbing / remove FSF address [3] * i2c: move all local variables to SRAM [4] * OMAP SPL: call timer_init in s_init to make udelay work earlier [5] * hint CONFIG_SYS_TEXT_BASE changed in commit message [6] * remove log 'Texas Instruments Revision detection unimplemented' for overo [6] * remove unintended whitespaces [6] * send 'shut up' to TWL4030 to avoid corruption when reading board revision [6] * use macros for overo revisions [6] * don't separate SPL specific configurations [6]
V2 -> V3 * modify omap_rev_string [6] * CONFIG_SYS_TEXT_BASE back to 0x80008000 [7] * modify CONFIG_SYS_SPL_MALLOC_START / CONFIG_SYS_SPL_MALLOC_SIZE / CONFIG_SPL_BSS_START_ADDR to avoid conflicts with CONFIG_SYS_TEXT_BASE [7] Andreas Müller (7): drivers/i2c/omap24xx_i2c.c: replace printf with one argument by puts board/overo/overo.c: replace printf with one argument by puts include/configs/omap3_overo.h: several cleanups drivers/i2c/omap24xx_i2c.c: move all local variables to SRAM OMAP SPL: call timer_init in s_init to make udelay work earlier omap_rev_string: output to stdout overo: add SPL support arch/arm/cpu/armv7/omap-common/hwinit-common.c | 10 +- arch/arm/cpu/armv7/omap-common/spl.c | 12 +-- arch/arm/cpu/armv7/omap3/board.c | 2 + arch/arm/include/asm/arch-omap3/mem.h | 26 +++++ arch/arm/include/asm/arch-omap4/sys_proto.h | 2 +- arch/arm/include/asm/arch-omap5/sys_proto.h | 2 +- arch/arm/include/asm/omap_common.h | 2 +- board/overo/config.mk | 28 ------ board/overo/overo.c | 79 ++++++++++++++-- board/overo/overo.h | 9 ++ drivers/i2c/omap24xx_i2c.c | 25 +++-- include/configs/omap3_overo.h | 121 ++++++++++++++++-------- 12 files changed, 217 insertions(+), 101 deletions(-) delete mode 100644 board/overo/config.mk -- 1.7.4.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
