Hi Stefano,

On Wednesday 04 January 2012 09:25 AM, Stefano Babic wrote:
Signed-off-by: Stefano Babic<sba...@denx.de>
CC: Tom Rini<tom.r...@gmail.com>
CC: Wolfgang Denk<w...@denx.de>
CC: Simon Schwarz<simonschwarz...@gmail.com>
---

Changes since V11:

- enable cache files in Makefile after checking build for OMAP4/5

How are you allocating memory for the page-tables(gd->tlb_addr)? Also
we need to take care of the complexities when u-boot runs after SPL.
Please have a look at this.

http://article.gmane.org/gmane.comp.boot-loaders.u-boot/100012/match=spl+cache


  arch/arm/cpu/armv7/Makefile |    2 --
  arch/arm/cpu/armv7/cpu.c    |    2 ++
  arch/arm/lib/Makefile       |    5 +++--
  3 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index f97fa3d..6b2addc 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -27,9 +27,7 @@ LIB   = $(obj)lib$(CPU).o

  START := start.o

-ifndef CONFIG_SPL_BUILD
  COBJS += cache_v7.o
-endif

  COBJS += cpu.o
  COBJS += syslib.o
diff --git a/arch/arm/cpu/armv7/cpu.c b/arch/arm/cpu/armv7/cpu.c
index 662c496..c6fa8ef 100644
--- a/arch/arm/cpu/armv7/cpu.c
+++ b/arch/arm/cpu/armv7/cpu.c
@@ -52,7 +52,9 @@ int cleanup_before_linux(void)
         *
         * we turn off caches etc ...
         */
+#ifndef CONFIG_SPL_BUILD
        disable_interrupts();
+#endif

        /*
         * Turn off I-cache and invalidate it
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 300c8fa..39a9550 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -39,8 +39,6 @@ GLCOBJS       += div0.o

  COBJS-y       += board.o
  COBJS-y       += bootm.o
-COBJS-y        += cache.o
-COBJS-y        += cache-cp15.o
  COBJS-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
  COBJS-y       += interrupts.o
  COBJS-y       += reset.o
@@ -48,6 +46,9 @@ SOBJS-$(CONFIG_USE_ARCH_MEMSET) += memset.o
  SOBJS-$(CONFIG_USE_ARCH_MEMCPY) += memcpy.o
  endif

+COBJS-y        += cache.o
+COBJS-y        += cache-cp15.o
+
  SRCS  := $(GLSOBJS:.o=.S) $(GLCOBJS:.o=.c) \
           $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
  OBJS  := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to