On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin <ag...@denx.de> wrote: > MACH_TYPE_TNY_A9G20 and MACH_TYPE_TNY_A9260 were removed > from mach-types.h. Add them to the board config file. > > Signed-off-by: Anatolij Gustschin <ag...@denx.de>
I built this and it fixes the failure. I did not test on hardware. Acked-by: Simon Glass <s...@chromium.org> > --- > board/calao/tny_a9260/tny_a9260.c | 5 ----- > include/configs/tny_a9260.h | 4 ++++ > 2 files changed, 4 insertions(+), 5 deletions(-) > > diff --git a/board/calao/tny_a9260/tny_a9260.c > b/board/calao/tny_a9260/tny_a9260.c > index ab51a33..a472b91 100644 > --- a/board/calao/tny_a9260/tny_a9260.c > +++ b/board/calao/tny_a9260/tny_a9260.c > @@ -86,11 +86,6 @@ int board_init(void) > /* Enable Ctrlc */ > console_init_f(); > > -#if defined(CONFIG_TNY_A9260) > - gd->bd->bi_arch_number = MACH_TYPE_TNY_A9260; > -#elif defined(CONFIG_TNY_A9G20) > - gd->bd->bi_arch_number = MACH_TYPE_TNY_A9G20; > -#endif > /* adress of boot parameters */ > gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; > > diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h > index 986aeba..c632de6 100644 > --- a/include/configs/tny_a9260.h > +++ b/include/configs/tny_a9260.h > @@ -45,8 +45,12 @@ > /* Define actual evaluation board type from used processor type */ > #ifdef CONFIG_AT91SAM9G20 > # define CONFIG_TNY_A9G20 > +# define MACH_TYPE_TNY_A9G20 2059 > +# define CONFIG_MACH_TYPE MACH_TYPE_TNY_A9G20 > #else > # define CONFIG_TNY_A9260 > +# define MACH_TYPE_TNY_A9260 2058 > +# define CONFIG_MACH_TYPE MACH_TYPE_TNY_A9260 > #endif Seems odd to me to have the #define MACH_TYPE_TNY_ inside the #ifdef also, but ok. > > /* ARM asynchronous clock */ > -- > 1.7.5.4 > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
