> On Sat, Nov 19, 2011 at 3:59 AM, Anatolij Gustschin <ag...@denx.de> wrote: > > MACH_TYPE_PXA_CERF was removed from mach-types.h. > > Add it to the board config file. > > > > Signed-off-by: Anatolij Gustschin <ag...@denx.de> > > I built this and it fixes the failure. I did not test on hardware. > > Acked-by: Simon Glass <s...@chromium.org>
Good, CCing original maintainer. Is the device still activelly used or can we drop it? M > > > --- > > board/cerf250/cerf250.c | 3 --- > > include/configs/cerf250.h | 3 +++ > > 2 files changed, 3 insertions(+), 3 deletions(-) > > > > diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c > > index 043afea..615c288 100644 > > --- a/board/cerf250/cerf250.c > > +++ b/board/cerf250/cerf250.c > > @@ -43,9 +43,6 @@ int board_init (void) > > dcache_disable(); > > icache_disable(); > > > > - /* arch number of cerf PXA Board */ > > - gd->bd->bi_arch_number = MACH_TYPE_PXA_CERF; > > - > > /* adress of boot parameters */ > > gd->bd->bi_boot_params = 0xa0000100; > > > > diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h > > index 70427da..dde9e14 100644 > > --- a/include/configs/cerf250.h > > +++ b/include/configs/cerf250.h > > @@ -42,6 +42,9 @@ > > > > #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ > > > > +#define MACH_TYPE_PXA_CERF 139 > > +#define CONFIG_MACH_TYPE MACH_TYPE_PXA_CERF > > + > > /* we will never enable dcache, because we have to setup MMU first */ > > #define CONFIG_SYS_DCACHE_OFF > > > > -- > > 1.7.5.4 > > > > _______________________________________________ > > U-Boot mailing list > > U-Boot@lists.denx.de > > http://lists.denx.de/mailman/listinfo/u-boot > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
