This is a cleaned up version of the U-Boot port provided with the BSP for
the Freescale COM Express P2020 evaluation kit.

Changes v2 -> v3:
- re-enable CCSR relocation

Changes v1 -> v2:
- fix checkpatch warnings
- remove references to NAND (this board lacks NAND)
- disable CCSR relocation

Ira W. Snyder (2):
  mpc85xx: support board-specific reset function
  mpc85xx: support for Freescale COM Express P2020

 MAINTAINERS                           |    4 +
 arch/powerpc/cpu/mpc85xx/cpu.c        |   17 +-
 arch/powerpc/include/asm/immap_85xx.h |    1 +
 board/freescale/p2020come/Makefile    |   46 +++
 board/freescale/p2020come/ddr.c       |  245 ++++++++++++++
 board/freescale/p2020come/law.c       |   36 ++
 board/freescale/p2020come/p2020come.c |  401 +++++++++++++++++++++++
 board/freescale/p2020come/tlb.c       |  100 ++++++
 boards.cfg                            |    2 +
 include/configs/P2020COME.h           |  569 +++++++++++++++++++++++++++++++++
 10 files changed, 1420 insertions(+), 1 deletions(-)
 create mode 100644 board/freescale/p2020come/Makefile
 create mode 100644 board/freescale/p2020come/ddr.c
 create mode 100644 board/freescale/p2020come/law.c
 create mode 100644 board/freescale/p2020come/p2020come.c
 create mode 100644 board/freescale/p2020come/tlb.c
 create mode 100644 include/configs/P2020COME.h

-- 
1.7.3.4

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to