On 11/09/2011 10:18 AM, Marek Vasut wrote:
> This contains support for the following components:
> - DUART
> - MMC
> - Both FEC interfaces
> - NAND
> - I2C (RTC, EEPROM)
> - SPI (FLASH)
>
> Signed-off-by: Marek Vasut <marek.va...@gmail.com>
> Cc: Stefano Babic <sba...@denx.de>
> Cc: Wolfgang Denk <w...@denx.de>
> Cc: Detlev Zundel <d...@denx.de>
> ---
> MAINTAINERS | 1 +
> board/denx/m28evk/Makefile | 43 +++++++
> board/denx/m28evk/m28evk.c | 195 ++++++++++++++++++++++++++++++
> boards.cfg | 1 +
> include/configs/m28evk.h | 282
> ++++++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 522 insertions(+), 0 deletions(-)
> create mode 100644 board/denx/m28evk/Makefile
> create mode 100644 board/denx/m28evk/m28evk.c
> create mode 100644 include/configs/m28evk.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 030fe4a..3fa2b70 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -859,6 +859,7 @@ Marek Vasut <marek.va...@gmail.com>
> palmtc xscale/pxa
> vpac270 xscale/pxa
> zipitz2 xscale/pxa
> + m28evk i.MX28
> efikamx i.MX51
> efikasb i.MX51
>
> diff --git a/board/denx/m28evk/Makefile b/board/denx/m28evk/Makefile
> new file mode 100644
> index 0000000..e6aba9a
> --- /dev/null
> +++ b/board/denx/m28evk/Makefile
> @@ -0,0 +1,43 @@
> +#
> +# (C) Copyright 2000-2006
> +# Wolfgang Denk, DENX Software Engineering, w...@denx.de.
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB = $(obj)lib$(BOARD).o
> +
> +COBJS := m28evk.o
> +
> +SRCS := $(COBJS:.o=.c)
> +OBJS := $(addprefix $(obj),$(COBJS))
> +
> +$(LIB): $(obj).depend $(OBJS)
> + $(call cmd_link_o_target, $(OBJS))
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
> new file mode 100644
> index 0000000..118e222
> --- /dev/null
> +++ b/board/denx/m28evk/m28evk.c
> @@ -0,0 +1,195 @@
> +/*
> + * DENX M28 module
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.va...@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/gpio.h>
> +#include <asm/io.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/iomux-mx28.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/sys_proto.h>
> +#include <linux/mii.h>
> +#include <miiphy.h>
> +#include <netdev.h>
> +#include <errno.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/*
> + * Functions
> + */
> +int board_early_init_f(void)
> +{
> + /* IO0 clock at 480MHz */
> + mx28_set_ioclk(MXC_IOCLK0, 480000);
> + /* IO1 clock at 480MHz */
> + mx28_set_ioclk(MXC_IOCLK1, 480000);
> +
> + /* SSP0 clock at 96MHz */
> + mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
> + /* SSP2 clock at 96MHz */
> + mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);
> +
> + return 0;
> +}
> +
> +int board_init(void)
> +{
> + /* Adress of boot parameters */
> + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
> +
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + /* dram_init must store complete ramsize in gd->ram_size */
> + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
> + return 0;
> +}
> +
> +#ifdef CONFIG_CMD_MMC
> +static int m28_mmc_wp(int id)
> +{
> + if (id != 0) {
> + printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
> + return 1;
> + }
> +
> + return gpio_get_value(MX28_PAD_AUART2_CTS__GPIO_3_10);
> +}
> +
> +int board_mmc_init(bd_t *bis)
> +{
> + /* Configure WP as output */
> + gpio_direction_input(MX28_PAD_AUART2_CTS__GPIO_3_10);
> +
> + return mxsmmc_initialize(bis, 0, m28_mmc_wp);
> +}
> +#endif
> +
> +#ifdef CONFIG_CMD_NET
> +
> +#define MII_OPMODE_STRAP_OVERRIDE 0x16
> +#define MII_PHY_CTRL1 0x1e
> +#define MII_PHY_CTRL2 0x1f
> +
> +int fecmxc_mii_postcall(int phy)
> +{
> + miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
> + miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
> + if (phy == 3)
> + miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8180);
> + return 0;
> +}
> +
> +int board_eth_init(bd_t *bis)
> +{
> + struct mx28_clkctrl_regs *clkctrl_regs =
> + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
> + struct eth_device *dev;
> + int ret;
> +
> + ret = cpu_eth_init(bis);
> +
> + clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
> + CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,
> + CLKCTRL_ENET_TIME_SEL_RMII_CLK);
> +
> + ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
> + if (ret) {
> + printf("FEC MXS: Unable to init FEC0\n");
> + return ret;
> + }
> +
> + ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
> + if (ret) {
> + printf("FEC MXS: Unable to init FEC1\n");
> + return ret;
> + }
> +
> + dev = eth_get_dev_by_name("FEC0");
> + if (!dev) {
> + printf("FEC MXS: Unable to get FEC0 device entry\n");
> + return -EINVAL;
> + }
> +
> + ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
> + if (ret) {
> + printf("FEC MXS: Unable to register FEC0 mii postcall\n");
> + return ret;
> + }
> +
> + dev = eth_get_dev_by_name("FEC1");
> + if (!dev) {
> + printf("FEC MXS: Unable to get FEC1 device entry\n");
> + return -EINVAL;
> + }
> +
> + ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
> + if (ret) {
> + printf("FEC MXS: Unable to register FEC1 mii postcall\n");
> + return ret;
> + }
> +
> + return ret;
> +}
> +
> +#ifdef CONFIG_M28_FEC_MAC_IN_OCOTP
> +
> +#define MXS_OCOTP_MAX_TIMEOUT 1000000
> +void imx_get_mac_from_fuse(char *mac)
> +{
> + struct mx28_ocotp_regs *ocotp_regs =
> + (struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
> + uint32_t data;
> +
> + memset(mac, 0, 6);
> +
> + writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
> +
> + if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
> + MXS_OCOTP_MAX_TIMEOUT)) {
> + printf("MXS FEC: Can't get MAC from OCOTP\n");
> + return;
> + }
> +
> + data = readl(&ocotp_regs->hw_ocotp_cust0);
> +
> + mac[0] = 0x00;
> + mac[1] = 0x04;
> + mac[2] = (data >> 24) & 0xff;
> + mac[3] = (data >> 16) & 0xff;
> + mac[4] = (data >> 8) & 0xff;
> + mac[5] = data & 0xff;
> +}
> +#else
> +void imx_get_mac_from_fuse(char *mac)
> +{
> + memset(mac, 0, 6);
> +}
> +#endif
> +
> +#endif
> diff --git a/boards.cfg b/boards.cfg
> index 88be71b..639cd62 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -157,6 +157,7 @@ tx25 arm arm926ejs tx25
> karo
> zmx25 arm arm926ejs zmx25
> syteco mx25
> imx27lite arm arm926ejs imx27lite
> logicpd mx27
> magnesium arm arm926ejs imx27lite
> logicpd mx27
> +m28evk arm arm926ejs -
> denx mx28
> nhk8815 arm arm926ejs nhk8815 st
> nomadik
> nhk8815_onenand arm arm926ejs nhk8815 st
> nomadik nhk8815:BOOT_ONENAND
> omap5912osk arm arm926ejs - ti
> omap
> diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
> new file mode 100644
> index 0000000..d88e09e
> --- /dev/null
> +++ b/include/configs/m28evk.h
> @@ -0,0 +1,282 @@
> +/*
> + * Copyright (C) 2011 Marek Vasut <marek.va...@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +#ifndef __M28_H__
> +#define __M28_H__
> +
> +#include <asm/arch/regs-base.h>
> +
> +/*
> + * SoC configurations
> + */
> +#define CONFIG_MX28 /* i.MX28 SoC */
> +#define CONFIG_MXS_GPIO /* GPIO control */
> +#define CONFIG_SYS_HZ 1000 /* Ticks per second */
> +
> +/*
> + * Define M28EVK machine type by hand until it lands in mach-types
> + */
> +#define MACH_TYPE_M28EVK 3613
> +
> +#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK
> +
> +#define CONFIG_SYS_NO_FLASH
> +#define CONFIG_SYS_ICACHE_OFF
> +#define CONFIG_SYS_DCACHE_OFF
> +#define CONFIG_BOARD_EARLY_INIT_F
> +#define CONFIG_ARCH_CPU_INIT
> +
> +/*
> + * U-Boot Commands
> + */
> +#include <config_cmd_default.h>
> +#define CONFIG_DISPLAY_CPUINFO
> +#define CONFIG_DOS_PARTITION
> +
> +#define CONFIG_CMD_CACHE
> +#define CONFIG_CMD_DATE
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_EEPROM
> +#define CONFIG_CMD_EXT2
> +#define CONFIG_CMD_FAT
> +#define CONFIG_CMD_GPIO
> +#define CONFIG_CMD_I2C
> +#define CONFIG_CMD_MII
> +#define CONFIG_CMD_MMC
> +#define CONFIG_CMD_NAND
> +#define CONFIG_CMD_NET
> +#define CONFIG_CMD_NFS
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_SETEXPR
> +#define CONFIG_CMD_SF
> +#define CONFIG_CMD_SPI
> +
> +/*
> + * Memory configurations
> + */
> +#define CONFIG_NR_DRAM_BANKS 1 /* 2 banks of
> DRAM */
> +#define PHYS_SDRAM_1 0x40000000 /* Base address
> */
> +#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
> +#define CONFIG_STACKSIZE 0x00010000 /* 128 KB stack
> */
> +#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for
> malloc */
> +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data
> */
> +#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest
> start adr */
> +#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM
> test */
> +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
> +/* Point initial SP in SRAM so SPL can use it too. */
> +#define CONFIG_SYS_INIT_SP_ADDR 0x00002000
> +/*
> + * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
> + * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
> + * binary. In case there was more of this mess, 0x100 bytes are skipped.
> + */
> +#define CONFIG_SYS_TEXT_BASE 0x40000100
> +
> +/*
> + * U-Boot general configurations
> + */
> +#define CONFIG_SYS_LONGHELP
> +#define CONFIG_SYS_PROMPT "=> "
> +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer
> size */
> +#define CONFIG_SYS_PBSIZE \
> + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
> + /* Print buffer size */
> +#define CONFIG_SYS_MAXARGS 32 /* Max number of
> command args */
> +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
> + /* Boot argument buffer size */
> +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
> +#define CONFIG_AUTO_COMPLETE /* Command auto
> complete */
> +#define CONFIG_CMDLINE_EDITING /* Command history etc
> */
> +#define CONFIG_SYS_HUSH_PARSER
> +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
> +
> +/*
> + * Serial Driver
> + */
> +#define CONFIG_PL011_SERIAL
> +#define CONFIG_PL011_CLOCK 24000000
> +#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
> +#define CONFIG_CONS_INDEX 0
> +#define CONFIG_BAUDRATE 115200 /* Default baud rate */
> +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600,
> 115200 }
> +
> +/*
> + * MMC Driver
> + */
> +#ifdef CONFIG_CMD_MMC
> +#define CONFIG_MMC
> +#define CONFIG_GENERIC_MMC
> +#define CONFIG_MXS_MMC
> +#endif
> +
> +/*
> + * NAND
> + */
> +#ifdef CONFIG_CMD_NAND
> +#define CONFIG_NAND_MXS
> +#define CONFIG_APBH_DMA
> +#define CONFIG_SYS_MAX_NAND_DEVICE 1
> +#define CONFIG_SYS_NAND_BASE 0x60000000
> +#define CONFIG_SYS_NAND_5_ADDR_CYCLE
> +#define NAND_MAX_CHIPS 8
> +
> +/* Environment is in NAND */
> +#define CONFIG_ENV_IS_IN_NAND
> +#define CONFIG_ENV_SIZE (16 * 1024)
> +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
> +#define CONFIG_ENV_SECT_SIZE (128 * 1024)
> +#define CONFIG_ENV_RANGE (512 * 1024)
> +#define CONFIG_ENV_OFFSET 0x300000
> +#define CONFIG_ENV_OFFSET_REDUND \
> + (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
> +
> +#define CONFIG_CMD_UBI
> +#define CONFIG_CMD_UBIFS
> +#define CONFIG_CMD_MTDPARTS
> +#define CONFIG_RBTREE
> +#define CONFIG_LZO
> +#define CONFIG_MTD_DEVICE
> +#define CONFIG_MTD_PARTITIONS
> +#define MTDIDS_DEFAULT "nand0=gpmi-nand.0"
> +#define MTDPARTS_DEFAULT \
> + "mtdparts=gpmi-nand.0:" \
> + "3m(bootloader)ro," \
> + "512k(environment)," \
> + "512k(redundant-environment)," \
> + "4m(kernel)," \
> + "-(filesystem)"
> +#endif
> +
> +/*
> + * Ethernet on SOC (FEC)
> + */
> +#ifdef CONFIG_CMD_NET
> +#define CONFIG_NET_MULTI
> +#define CONFIG_ETHPRIME "FEC0"
> +#define CONFIG_FEC_MXC
> +#define CONFIG_FEC_MXC_MULTI
> +#define CONFIG_MII
> +#define CONFIG_DISCOVER_PHY
> +#define CONFIG_FEC_XCV_TYPE RMII
> +#endif
> +
> +/*
> + * I2C
> + */
> +#ifdef CONFIG_CMD_I2C
> +#define CONFIG_I2C_MXS
> +#define CONFIG_HARD_I2C
> +#define CONFIG_SYS_I2C_SPEED 400000
> +#endif
> +
> +/*
> + * EEPROM
> + */
> +#ifdef CONFIG_CMD_EEPROM
> +#define CONFIG_SYS_I2C_MULTI_EEPROMS
> +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
> +#endif
> +
> +/*
> + * RTC
> + */
> +#ifdef CONFIG_CMD_DATE
> +/* Use the internal RTC in the MXS chip */
> +#define CONFIG_RTC_INTERNAL
> +#ifdef CONFIG_RTC_INTERNAL
> +#define CONFIG_RTC_MXS
> +#else
> +#define CONFIG_RTC_M41T62
> +#define CONFIG_SYS_I2C_RTC_ADDR 0x68
> +#define CONFIG_SYS_M41T11_BASE_YEAR 2000
> +#endif
> +#endif
> +
> +/*
> + * SPI
> + */
> +#ifdef CONFIG_CMD_SPI
> +#define CONFIG_HARD_SPI
> +#define CONFIG_MXS_SPI
> +#define CONFIG_SPI_HALF_DUPLEX
> +#define CONFIG_DEFAULT_SPI_BUS 2
> +#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
> +
> +/* SPI FLASH */
> +#ifdef CONFIG_CMD_SF
> +#define CONFIG_SPI_FLASH
> +#define CONFIG_SPI_FLASH_STMICRO
> +#define CONFIG_SPI_FLASH_CS 2
> +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
> +#define CONFIG_SF_DEFAULT_SPEED 24000000
> +
> +#define CONFIG_ENV_SPI_CS 0
> +#define CONFIG_ENV_SPI_BUS 2
> +#define CONFIG_ENV_SPI_MAX_HZ 24000000
> +#define CONFIG_ENV_SPI_MODE SPI_MODE_0
> +#endif
> +#endif
> +
> +/*
> + * Boot Linux
> + */
> +#define CONFIG_CMDLINE_TAG
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_BOOTDELAY 3
> +#define CONFIG_BOOTFILE "uImage"
> +#define CONFIG_BOOTARGS "console=ttyAM0,115200n8 "
> +#define CONFIG_BOOTCOMMAND "run bootcmd_net"
> +#define CONFIG_LOADADDR 0x42000000
> +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
> +
> +/*
> + * Extra Environments
> + */
> +#define CONFIG_EXTRA_ENV_SETTINGS
> \
> + "update_nand_full_filename=u-boot.nand\0" \
> + "update_nand_firmware_filename=u-boot.sb\0" \
> + "update_nand_firmware_maxsz=0x100000\0" \
> + "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
> + "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
> + "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \
> + "nand device 0 ; " \
> + "nand info ; " \
> + "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
> + "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
> + "update_nand_full=" /* Update FCB, DBBT and FW */ \
> + "if tftp ${update_nand_full_filename} ; then " \
> + "run update_nand_get_fcb_size ; " \
> + "nand scrub -y 0x0 ${filesize} ; " \
> + "nand write.raw ${loadaddr} 0x0 ${update_nand_fcb} ; " \
> + "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
> + "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
> + "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
> + "fi\0" \
> + "update_nand_firmware=" /* Update only firmware */ \
> + "if tftp ${update_nand_firmware_filename} ; then " \
> + "run update_nand_get_fcb_size ; " \
> + "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
> + "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \
> + "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
> + "nand erase ${fcb_sz} ${fw_sz} ; " \
> + "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
> + "nand write ${loadaddr} ${fw_off} ${filesize} ; " \
> + "fi\0"
> +
> +#endif /* __M28_H__ */
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
