On 09/16/2011 04:01 PM, Fabio Estevam wrote:
> Currently the reset cause is printed like:
> CPU: Freescale i.MX31 rev 2.0 at 531 MHz.Reset cause: POR
>
> Improve readability by adding a new line like it is done on other i.MX boards.
>
> Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
> ---
> arch/arm/cpu/arm1136/mx31/generic.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/cpu/arm1136/mx31/generic.c
> b/arch/arm/cpu/arm1136/mx31/generic.c
> index e3a4d1b..c6def5d 100644
> --- a/arch/arm/cpu/arm1136/mx31/generic.c
> +++ b/arch/arm/cpu/arm1136/mx31/generic.c
> @@ -180,7 +180,7 @@ int print_cpuinfo (void)
> {
> u32 srev = get_cpu_rev();
>
> - printf("CPU: Freescale i.MX31 rev %d.%d%s at %d MHz.",
> + printf("CPU: Freescale i.MX31 rev %d.%d%s at %d MHz.\n",
> (srev & 0xF0) >> 4, (srev & 0x0F),
> ((srev & 0x8000) ? " unknown" : ""),
> mx31_get_mcu_main_clk() / 1000000);
Applied to u-boot-imx, next branch, thanks.
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
