Currently the reset cause is printed like:
CPU: Freescale i.MX31 rev 2.0 at 531 MHz.Reset cause: POR
Improve readability by adding a new line like it is done on other i.MX boards.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
arch/arm/cpu/arm1136/mx31/generic.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/arm/cpu/arm1136/mx31/generic.c
b/arch/arm/cpu/arm1136/mx31/generic.c
index e3a4d1b..c6def5d 100644
--- a/arch/arm/cpu/arm1136/mx31/generic.c
+++ b/arch/arm/cpu/arm1136/mx31/generic.c
@@ -180,7 +180,7 @@ int print_cpuinfo (void)
{
u32 srev = get_cpu_rev();
- printf("CPU: Freescale i.MX31 rev %d.%d%s at %d MHz.",
+ printf("CPU: Freescale i.MX31 rev %d.%d%s at %d MHz.\n",
(srev & 0xF0) >> 4, (srev & 0x0F),
((srev & 0x8000) ? " unknown" : ""),
mx31_get_mcu_main_clk() / 1000000);
--
1.6.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
