Hello all,
I really appreciate all of your replies and sorry for not being responsive for
sometime. But I am glad to say that I was able to flash new u-boot along with
fman ucode and rcw. I am using p4080DS dev board from freescale and the rcw is
important in terms of which ports to be enabled upon boot. I ran into all of
these problems because the ltib version I was using was not compatible with my
version of the board. Wish I knew this earlier but there was no way for me to
find this out. Neways all is up and running and thanks once again for providing
all the help.
Sincerely,Simran
Date: Thu, 21 Jul 2011 10:24:07 +0000
Subject: Re: [U-Boot] U-BOOT TFTP
From: vickylinu...@gmail.com
To: simrangill...@hotmail.com
CC: u-boot@lists.denx.de
Hello simran
The things u have to do is check your network connectivity between board
and target .If it is not working after that, make a clean u-boot
compilation again with basic configuration(no confusing) of your board
header file and port again.
Regards
Vignesh Rajendran
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
