Dear Aneesh V, In message <4e16fd50.3090...@ti.com> you wrote: > > > - use a different name instead of OBJTREE everywhere, and leave > > What Daniel suggested about using something like SPLTREE(or SPLOBJTREE) > seems to be be right solution then. Are you ok with that?
Yes, if it works without too much effort. > > - introduce a new variable that stores the original setting of OBJTREE > > so we can refer to this later > > > >> I used BUILD_DIR/spl/obj as OBJTREE to avoid this problem. Well, this may cause nasty problems. Note that BUILD_DIR is usually not set for local builds; current Makefile looks like this: OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) SRCTREE := $(CURDIR) TOPDIR := $(SRCTREE) ... ifneq ($(OBJTREE),$(SRCTREE)) ... Tests like this here will fail if you use BUILD_DIR (which is not set) instead of OBJTREE (which is set to CURDIR). > You want to continue to maintain nand_boot.c kind of files within > $(TOPDIR)/spl/ , right? Yes. Copies of, or symlinks to, source files should be avoided. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de If you're not part of the solution, you're part of the problem. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
