Dear Fabio Estevam, In message <4df89c84.7090...@freescale.com> you wrote: ... > CPU: Freescale i.MX31 rev 2.0 unknown at 531 MHz.Reset cause: WDOG ... > When the chip version is not valid, then we print: > > CPU: Freescale i.MX31 (unknown rev, srev=0x20) at 531 MHz.Reset cause: WDOG
Compare to the current line above - which new information do you print? None. You just print it in a new format, and with more characters, i. e. with a worse SNR. > Please let me know what you think about this proposal. You received 3 messages from 3 different guys who told you all the same: just leave the code as is. Your proposed changes are not considered an improvement. Thanks. Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "How is this place run - is it an anarchy?" "No, I wouldn't say so; it is not that well organised..." _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
