On Sat, May 17, 2025 at 5:15 PM Michael Nazzareno Trimarchi <mich...@amarulasolutions.com> wrote:
> Can you please point me to an example of a tested board? I have just tested the top-of-tree U-Boot on an imx8mn evk board: U-Boot SPL 2025.07-rc2-00018-g126a88d49bca (May 17 2025 - 17:21:14 -0300) WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout) SEC0: RNG instantiated Normal Boot Trying to boot from BOOTROM Boot Stage: Primary boot image offset 0x8000, pagesize 0x200, ivt offset 0x0 NOTICE: Do not release JR0 to NS as it can be used by HAB NOTICE: BL31: v2.12.0(release):v2.12.0 NOTICE: BL31: Built : 17:16:49, May 17 2025 U-Boot 2025.07-rc2-00018-g126a88d49bca (May 17 2025 - 17:21:14 -0300) CPU: NXP i.MX8MNano Quad Rev1.0 A53 at 1200 MHz CPU: Consumer temperature grade (0C to 95C) at 32C Model: NXP i.MX8MNano DDR4 EVK board DRAM: 2 GiB Core: 180 devices, 23 uclasses, devicetree: separate WDT: Started watchdog@30280000 with servicing every 1000ms (60s timeout) MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... Reading from MMC(1)... OK In: serial@30890000 Out: serial@30890000 Err: serial@30890000 SEC0: RNG instantiated Net: eth0: ethernet@30be0000 Hit any key to stop autoboot: 0 u-boot=> Make sure you are using the most recent U-Boot. We had some imx8m clock drive hickups after 2025.04.
