On 2025/4/16 05:51, Heiko Stuebner wrote:
The rk3576 uses a different base-compatible, as starting with this
generation, the clock phase tuning is done via registers inside
the mmc controller and not from inside the CRU.
In U-Boot we do not tune at all, so no other code changes are
necessary.
Signed-off-by: Heiko Stuebner <he...@sntech.de>
Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com>
Reviewed-by: Jonas Karlman <jo...@kwiboo.se>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Thanks,
- Kever
---
drivers/mmc/rockchip_dw_mmc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/rockchip_dw_mmc.c b/drivers/mmc/rockchip_dw_mmc.c
index 422b8f7e4c8..7a72abaa38a 100644
--- a/drivers/mmc/rockchip_dw_mmc.c
+++ b/drivers/mmc/rockchip_dw_mmc.c
@@ -171,6 +171,7 @@ static int rockchip_dwmmc_bind(struct udevice *dev)
static const struct udevice_id rockchip_dwmmc_ids[] = {
{ .compatible = "rockchip,rk2928-dw-mshc" },
{ .compatible = "rockchip,rk3288-dw-mshc" },
+ { .compatible = "rockchip,rk3576-dw-mshc" },
{ }
};
