Now that eMMC is working properly on H616 devices, it became apparent that some boards were missing the right defconfig bits to enable eMMC access.
Add the eMMC device number to the Tanix TX1 and the X96 Mate defconfig, also the eMMC boot option to the TX1. Oddly enough the X96 Mate had just this bit already. Signed-off-by: Andre Przywara <andre.przyw...@arm.com> --- configs/tanix_tx1_defconfig | 2 ++ configs/x96_mate_defconfig | 1 + 2 files changed, 3 insertions(+) diff --git a/configs/tanix_tx1_defconfig b/configs/tanix_tx1_defconfig index 28cf9513c30..00e34dc5ad9 100644 --- a/configs/tanix_tx1_defconfig +++ b/configs/tanix_tx1_defconfig @@ -14,11 +14,13 @@ CONFIG_MACH_SUN50I_H616=y CONFIG_SUNXI_DRAM_H616_LPDDR3=y CONFIG_R_I2C_ENABLE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_SPL_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 +CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_AXP313_POWER=y CONFIG_AXP_DCDC3_VOLT=1200 CONFIG_USB_EHCI_HCD=y diff --git a/configs/x96_mate_defconfig b/configs/x96_mate_defconfig index bd9b611d6f5..c0628370df9 100644 --- a/configs/x96_mate_defconfig +++ b/configs/x96_mate_defconfig @@ -11,6 +11,7 @@ CONFIG_DRAM_SUNXI_TPR11=0xffffdddd CONFIG_DRAM_SUNXI_TPR12=0xfedf7557 CONFIG_MACH_SUN50I_H616=y CONFIG_SUNXI_DRAM_H616_DDR3_1333=y +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_R_I2C_ENABLE=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y -- 2.46.3
