Dne četrtek, 27. marec 2025 ob 22:21:02 Srednjeevropski standardni čas je Andre Przywara napisal(a): > Now that eMMC is working properly on H616 devices, it became apparent > that some boards were missing the right defconfig bits to enable eMMC > access. > > Add the eMMC device number to the Tanix TX1 and the X96 Mate defconfig, > also the eMMC boot option to the TX1. Oddly enough the X96 Mate had > just this bit already. > > Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
Expected consequence of the fix :) Reviewed-by: Jernej Skrabec <jernej.skra...@gmail.com> Best regards, Jernej > --- > configs/tanix_tx1_defconfig | 2 ++ > configs/x96_mate_defconfig | 1 + > 2 files changed, 3 insertions(+) > > diff --git a/configs/tanix_tx1_defconfig b/configs/tanix_tx1_defconfig > index 28cf9513c30..00e34dc5ad9 100644 > --- a/configs/tanix_tx1_defconfig > +++ b/configs/tanix_tx1_defconfig > @@ -14,11 +14,13 @@ CONFIG_MACH_SUN50I_H616=y > CONFIG_SUNXI_DRAM_H616_LPDDR3=y > CONFIG_R_I2C_ENABLE=y > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 > CONFIG_SPL_I2C=y > CONFIG_SPL_SYS_I2C_LEGACY=y > CONFIG_SYS_I2C_MVTWSI=y > CONFIG_SYS_I2C_SLAVE=0x7f > CONFIG_SYS_I2C_SPEED=400000 > +CONFIG_SUPPORT_EMMC_BOOT=y > CONFIG_AXP313_POWER=y > CONFIG_AXP_DCDC3_VOLT=1200 > CONFIG_USB_EHCI_HCD=y > diff --git a/configs/x96_mate_defconfig b/configs/x96_mate_defconfig > index bd9b611d6f5..c0628370df9 100644 > --- a/configs/x96_mate_defconfig > +++ b/configs/x96_mate_defconfig > @@ -11,6 +11,7 @@ CONFIG_DRAM_SUNXI_TPR11=0xffffdddd > CONFIG_DRAM_SUNXI_TPR12=0xfedf7557 > CONFIG_MACH_SUN50I_H616=y > CONFIG_SUNXI_DRAM_H616_DDR3_1333=y > +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 > CONFIG_R_I2C_ENABLE=y > # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > CONFIG_SPL_I2C=y >
