The config fragment "am62x_a53_usbdfu.config" which adds USB DFU support for AM62x SoC is applicable to the AM62Px SoC as well. Hence, include it in "am62px_evm_a53_defconfig" in order to enable support for USB DFU flash and boot. Remove those configs from "am62px_evm_a53_defconfig" which are present in the "am62x_a53_usbdfu.config" config fragment that is being included.
Signed-off-by: Siddharth Vadapalli <s-vadapa...@ti.com> Reviewed-by: Mattijs Korpershoek <mkorpersh...@baylibre.com> Reviewed-by: Roger Quadros <rog...@kernel.org> --- v3: https://patchwork.ozlabs.org/project/uboot/cover/20241221025229.361625-1-s-vadapa...@ti.com/ Changes since v3: - Collected Reviewed-by tags. Regards, Siddharth. configs/am62px_evm_a53_defconfig | 24 +----------------------- 1 file changed, 1 insertion(+), 23 deletions(-) diff --git a/configs/am62px_evm_a53_defconfig b/configs/am62px_evm_a53_defconfig index 9635beb1b2..9862b1f9a1 100644 --- a/configs/am62px_evm_a53_defconfig +++ b/configs/am62px_evm_a53_defconfig @@ -41,14 +41,11 @@ CONFIG_SPL_SYS_MMCSD_RAW_MODE=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DMA=y -CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_I2C=y CONFIG_SPL_DM_MAILBOX=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_POWER_DOMAIN=y -CONFIG_SPL_RAM_SUPPORT=y -CONFIG_SPL_RAM_DEVICE=y # CONFIG_SPL_SPI_FLASH_TINY is not set CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y CONFIG_SPL_SPI_LOAD=y @@ -58,14 +55,12 @@ CONFIG_SPL_YMODEM_SUPPORT=y CONFIG_CMD_BOOTEFI_SELFTEST=y CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_MTD=y CONFIG_CMD_REMOTEPROC=y -CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_EFIDEBUG=y CONFIG_CMD_TIME=y @@ -85,17 +80,12 @@ CONFIG_SPL_DM_DEVICE_REMOVE=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_REGMAP=y CONFIG_SPL_REGMAP=y -CONFIG_SPL_SYSCON=y CONFIG_SPL_OF_TRANSLATE=y CONFIG_CLK=y CONFIG_SPL_CLK=y CONFIG_CLK_TI_SCI=y -CONFIG_DFU_MMC=y CONFIG_DFU_MTD=y -CONFIG_DFU_RAM=y CONFIG_DFU_SF=y -CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000 -CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000 CONFIG_DMA_CHANNELS=y CONFIG_TI_K3_NAVSS_UDMA=y CONFIG_USB_FUNCTION_FASTBOOT=y @@ -164,22 +154,10 @@ CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_TI_SCI=y CONFIG_DM_THERMAL=y -CONFIG_USB=y -CONFIG_DM_USB_GADGET=y -CONFIG_SPL_DM_USB_GADGET=y CONFIG_SPL_USB_HOST=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GENERIC=y -CONFIG_SPL_USB_DWC3_GENERIC=y CONFIG_SPL_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_SPL_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 -CONFIG_USB_GADGET_PRODUCT_NUM=0x6165 -CONFIG_SPL_DFU=y CONFIG_FS_FAT_MAX_CLUSTSIZE=16384 CONFIG_EFI_SET_TIME=y #include <configs/k3_efi_capsule.config> +#include <configs/am62x_a53_usbdfu.config> -- 2.43.0
