There doesn't seem to be a good reason to use a different value for TPL
than SPL. Change the TPL value, since it allows a 256-byte bloblist to
be safely located above the stack in all phases.
Note that for most boards, SDRAM init happens in TPL so the SPL stack
ends up in DRAM, at address CONFIG_SPL_STACK_R_ADDR.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v2:
- Reword commit to mention comments from Jonas
arch/arm/mach-rockchip/rk3399/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-rockchip/rk3399/Kconfig
b/arch/arm/mach-rockchip/rk3399/Kconfig
index fc55b498111..8064b6286fc 100644
--- a/arch/arm/mach-rockchip/rk3399/Kconfig
+++ b/arch/arm/mach-rockchip/rk3399/Kconfig
@@ -159,7 +159,7 @@ config TPL_LDSCRIPT
default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds"
config TPL_STACK
- default 0xff8effff
+ default 0xff8eff00
config TPL_TEXT_BASE
default 0xff8c2000
--
2.43.0
