Pull the bbmiiphy initialization code from designware_eth_probe() into
dedicated function, dw_bb_mdio_init(), just like all the other MDIO
initialization functions.
Keep check for "snps,bitbang-mii" in the designware_eth_probe(), so the
driver can initialize this MDIO only in case the property is present,
and initialize regular DW MDIO in case it is not present.
The dw_bb_mdio_init() allocates its own MDIO instance, because thus far
code gated behind "snps,bitbang-mii" did depend on allocation of MDIO bus
by the other two MDIO bus options and then rewrote the newly allocated
MDIO bus callbacks, which is wrong, instead allocate proper MDIO bus with
the correct callbacks outright.
Signed-off-by: Marek Vasut <marek.vasut+rene...@mailbox.org>
---
Cc: Christian Marangi <ansuels...@gmail.com>
Cc: Ilias Apalodimas <ilias.apalodi...@linaro.org>
Cc: Jerome Forissier <jerome.foriss...@linaro.org>
Cc: Jim Liu <jjl...@nuvoton.com>
Cc: Joe Hershberger <joe.hershber...@ni.com>
Cc: Mario Six <mario....@gdsys.cc>
Cc: Michal Simek <michal.si...@amd.com>
Cc: Nobuhiro Iwamatsu <iwama...@nigauri.org>
Cc: Paul Barker <paul.barker...@bp.renesas.com>
Cc: Ramon Fried <rfried....@gmail.com>
Cc: Simon Glass <s...@chromium.org>
Cc: Sughosh Ganu <sughosh.g...@linaro.org>
Cc: Tom Rini <tr...@konsulko.com>
Cc: u-boot@lists.denx.de
---
V2: New patch
---
drivers/net/designware.c | 95 ++++++++++++++++++++++++++--------------
1 file changed, 63 insertions(+), 32 deletions(-)
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index 1bfc098817e..2724096ad2e 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -300,6 +300,50 @@ struct bb_miiphy_bus bb_miiphy_buses[] = {
};
int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses);
+
+static int dw_bb_mdio_init(const char *name, struct udevice *dev)
+{
+ struct dw_eth_dev *dwpriv = dev_get_priv(dev);
+ struct mii_dev *bus = mdio_alloc();
+ int ret;
+
+ if (!bus) {
+ printf("Failed to allocate MDIO bus\n");
+ return -ENOMEM;
+ }
+
+ debug("\n%s: use bitbang mii..\n", dev->name);
+ ret = gpio_request_by_name(dev, "snps,mdc-gpio", 0,
+ &dwpriv->mdc_gpio,
+ GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+ if (ret) {
+ debug("no mdc-gpio\n");
+ return ret;
+ }
+ ret = gpio_request_by_name(dev, "snps,mdio-gpio", 0,
+ &dwpriv->mdio_gpio,
+ GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
+ if (ret) {
+ debug("no mdio-gpio\n");
+ return ret;
+ }
+ dwpriv->bb_delay = dev_read_u32_default(dev, "snps,bitbang-delay", 1);
+
+ dwpriv->bus = bus;
+ dwpriv->dev = dev;
+
+ bb_miiphy_buses[0].priv = dwpriv;
+ snprintf(bus->name, sizeof(bus->name), "%s", name);
+ strlcpy(bb_miiphy_buses[0].name, bus->name, MDIO_NAME_LEN);
+ bus->read = bb_miiphy_read;
+ bus->write = bb_miiphy_write;
+#if CONFIG_IS_ENABLED(DM_GPIO)
+ bus->reset = dw_mdio_reset;
+#endif
+ bus->priv = dwpriv;
+
+ return mdio_register(bus);
+}
#endif
static void tx_descs_init(struct dw_eth_dev *priv)
@@ -773,6 +817,7 @@ int designware_eth_probe(struct udevice *dev)
{
struct eth_pdata *pdata = dev_get_plat(dev);
struct dw_eth_dev *priv = dev_get_priv(dev);
+ bool __maybe_unused bbmiiphy = false;
phys_addr_t iobase = pdata->iobase;
void *ioaddr;
int ret, err;
@@ -851,44 +896,30 @@ int designware_eth_probe(struct udevice *dev)
priv->interface = pdata->phy_interface;
priv->max_speed = pdata->max_speed;
-#if IS_ENABLED(CONFIG_DM_MDIO)
- ret = dw_dm_mdio_init(dev->name, dev);
-#else
- ret = dw_mdio_init(dev->name, dev);
-#endif
- if (ret) {
- err = ret;
- goto mdio_err;
- }
- priv->bus = miiphy_get_dev_by_name(dev->name);
- priv->dev = dev;
-
#if IS_ENABLED(CONFIG_BITBANGMII) && IS_ENABLED(CONFIG_DM_GPIO)
- if (dev_read_bool(dev, "snps,bitbang-mii")) {
- debug("\n%s: use bitbang mii..\n", dev->name);
- ret = gpio_request_by_name(dev, "snps,mdc-gpio", 0,
- &priv->mdc_gpio, GPIOD_IS_OUT
- | GPIOD_IS_OUT_ACTIVE);
+ bbmiiphy = dev_read_bool(dev, "snps,bitbang-mii");
+ if (bbmiiphy) {
+ ret = dw_bb_mdio_init(dev->name, dev);
if (ret) {
- debug("no mdc-gpio\n");
- return ret;
+ err = ret;
+ goto mdio_err;
}
- ret = gpio_request_by_name(dev, "snps,mdio-gpio", 0,
- &priv->mdio_gpio, GPIOD_IS_OUT
- | GPIOD_IS_OUT_ACTIVE);
+ } else
+#endif
+ {
+#if IS_ENABLED(CONFIG_DM_MDIO)
+ ret = dw_dm_mdio_init(dev->name, dev);
+#else
+ ret = dw_mdio_init(dev->name, dev);
+#endif
if (ret) {
- debug("no mdio-gpio\n");
- return ret;
+ err = ret;
+ goto mdio_err;
}
- priv->bb_delay = dev_read_u32_default(dev,
"snps,bitbang-delay", 1);
-
- bb_miiphy_buses[0].priv = priv;
- strlcpy(bb_miiphy_buses[0].name, priv->bus->name,
- MDIO_NAME_LEN);
- priv->bus->read = bb_miiphy_read;
- priv->bus->write = bb_miiphy_write;
+ priv->bus = miiphy_get_dev_by_name(dev->name);
+ priv->dev = dev;
}
-#endif
+
ret = dw_phy_init(priv, dev);
debug("%s, ret=%d\n", __func__, ret);
if (!ret)
--
2.47.2
