> 主题: [EXT] Re: [PATCH v2 16/17] imx95_evk: add i.MX95 19x19 EVK board > basic support > > > I gave this series a go on top of 5cfbf8c364 origin/next on an EVK I have here > and I saw no u-boot proper output after the ATF. > > Here is what I saw on UART2: > U-Boot SPL 2025.01-rc5-00393-g9b292f7d347f (Dec 27 2024 - 16:12:20 -0800) > DDRMIX is powered UP Normal Boot Trying to boot from MMC2 Primary set > selected Load image from MMC/SD 0xdec00 > NOTICE: BL31: v2.10.0 (release):lf-6.6.52-2.2.0 > NOTICE: BL31: Built : 16:06:15, Dec 27 2024 > > U-Boot SPL 2025.01-rc5-00393-g9b292f7d347f (Dec 27 2024 - 16:12:20 -0800) > DDRMIX is powered UP Normal Boot Trying to boot from MMC2 Primary set > selected Load image from MMC/SD 0xdec00 > NOTICE: BL31: v2.10.0 (release):lf-6.6.52-2.2.0 > NOTICE: BL31: Built : 16:06:15, Dec 27 2024 ^^^ nothing after this > > Any thoughts on what is wrong here? > > Best Regards, > > Tim
Hi Tim, I tried it on my MX95 and it works well, so I not sure what causes this issue on your EVK. Best Regards, Alice Guo
