Sandeep,

Any comments?



On 05/01/11 13:10, Igor Grinberg wrote:

> CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR were not defined for
> this board thus breaking its build.
>
> Signed-off-by: Igor Grinberg <grinb...@compulab.co.il>
> Cc: Sandeep Paulraj <s-paul...@ti.com>
> Cc: Nishant Kamat <nska...@ti.com>
> Cc: Kshitij Gupta <kshi...@ti.com>
> ---
>  include/configs/omap1610h2.h  |    7 +++++++
>  include/configs/omap1610inn.h |    7 +++++++
>  2 files changed, 14 insertions(+), 0 deletions(-)
>
> diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
> index 2936dcc..7e53ae6 100644
> --- a/include/configs/omap1610h2.h
> +++ b/include/configs/omap1610h2.h
> @@ -152,6 +152,13 @@
>  #define PHYS_SDRAM_1         0x10000000      /* SDRAM Bank #1 */
>  #define PHYS_SDRAM_1_SIZE    0x02000000      /* 32 MB */
>  
> +#define CONFIG_SYS_SDRAM_BASE                PHYS_SDRAM_1
> +#define CONFIG_SYS_INIT_RAM_SIZE     0x1000
> +/* FIXME: the value below is taken from davinci which uses ARM926EJS cpu */
> +#define CONFIG_SYS_INIT_SP_ADDR              (CONFIG_SYS_SDRAM_BASE +    \
> +                                      CONFIG_SYS_INIT_RAM_SIZE - \
> +                                      GENERATED_GBL_DATA_SIZE)
> +
>  #define PHYS_FLASH_1_BM1     0x00000000      /* Flash Bank #1 if booting 
> from flash */
>  #define PHYS_FLASH_1_BM0     0x0C000000      /* Flash Bank #1 if booting 
> from RAM */
>  
> diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
> index 0b41c46..be569a3 100644
> --- a/include/configs/omap1610inn.h
> +++ b/include/configs/omap1610inn.h
> @@ -157,6 +157,13 @@
>  #define PHYS_SDRAM_1         0x10000000      /* SDRAM Bank #1 */
>  #define PHYS_SDRAM_1_SIZE    0x02000000      /* 32 MB */
>  
> +#define CONFIG_SYS_SDRAM_BASE                PHYS_SDRAM_1
> +#define CONFIG_SYS_INIT_RAM_SIZE     0x1000
> +/* FIXME: the value below is taken from davinci which uses ARM926EJS cpu */
> +#define CONFIG_SYS_INIT_SP_ADDR              (CONFIG_SYS_SDRAM_BASE +    \
> +                                      CONFIG_SYS_INIT_RAM_SIZE - \
> +                                      GENERATED_GBL_DATA_SIZE)
> +
>  #define PHYS_FLASH_1_BM1     0x00000000      /* Flash Bank #1 if booting 
> from flash */
>  #define PHYS_FLASH_1_BM0     0x0C000000      /* Flash Bank #1 if booting 
> from RAM */
>  

-- 
Regards,
Igor.

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to