This board used machine_is_* macros for identifying the arch number.
Fix this by introducing a board specific configuration variable.
Signed-off-by: Igor Grinberg <grinb...@compulab.co.il>
---
v2: remove the ifdeferry by introducing config variable,
Alessandro, what about this one?
board/ti/omap1610inn/omap1610innovator.c | 7 +------
include/configs/omap1610h2.h | 4 +++-
include/configs/omap1610inn.h | 4 +++-
3 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/board/ti/omap1610inn/omap1610innovator.c
b/board/ti/omap1610inn/omap1610innovator.c
index 44818bb..a071f63 100644
--- a/board/ti/omap1610inn/omap1610innovator.c
+++ b/board/ti/omap1610inn/omap1610innovator.c
@@ -63,12 +63,7 @@ static inline void delay (unsigned long loops)
int board_init (void)
{
- if (machine_is_omap_h2())
- gd->bd->bi_arch_number = MACH_TYPE_OMAP_H2;
- else if (machine_is_omap_innovator())
- gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR;
- else
- gd->bd->bi_arch_number = MACH_TYPE_OMAP_GENERIC;
+ gd->bd->bi_arch_number = CONFIG_BOARD_MACH_TYPE;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x10000100;
diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
index 7e53ae6..0770d9d 100644
--- a/include/configs/omap1610h2.h
+++ b/include/configs/omap1610h2.h
@@ -34,7 +34,9 @@
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP1610 1 /* which is in a 1610 */
#define CONFIG_H2_OMAP1610 1 /* on an H2 Board */
-#define CONFIG_MACH_OMAP_H2 /* Select board mach-type */
+
+/* Select board mach-type */
+#define CONFIG_BOARD_MACH_TYPE MACH_TYPE_OMAP_H2
/* input clock of PLL */
/* the OMAP1610 H2 has 12MHz input clock */
diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
index be569a3..1859780 100644
--- a/include/configs/omap1610inn.h
+++ b/include/configs/omap1610inn.h
@@ -34,7 +34,9 @@
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP1610 1 /* which is in a 1610 */
#define CONFIG_INNOVATOROMAP1610 1 /* a Innovator Board */
-#define CONFIG_MACH_OMAP_INNOVATOR /* Select board mach-type */
+
+/* Select board mach-type */
+#define CONFIG_BOARD_MACH_TYPE MACH_TYPE_OMAP_INNOVATOR
/* input clock of PLL */
/* the OMAP1610 Innovator has 12MHz input clock */
--
1.7.3.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
