ping!
It has been two weeks...
On 05/02/11 15:49, Igor Grinberg wrote:
> at91 ethernet module used machine_is_cbs337() macro for board specific
> Linux compatibility issue.
> Remove this, as no such board exist in current U-Boot tree.
>
> Signed-off-by: Igor Grinberg <grinb...@compulab.co.il>
> ---
> arch/arm/cpu/arm920t/at91rm9200/ether.c | 18 +++---------------
> 1 files changed, 3 insertions(+), 15 deletions(-)
>
> diff --git a/arch/arm/cpu/arm920t/at91rm9200/ether.c
> b/arch/arm/cpu/arm920t/at91rm9200/ether.c
> index e1cdeba..2015e13 100644
> --- a/arch/arm/cpu/arm920t/at91rm9200/ether.c
> +++ b/arch/arm/cpu/arm920t/at91rm9200/ether.c
> @@ -195,21 +195,9 @@ int eth_init (bd_t * bd)
>
> eth_getenv_enetaddr("ethaddr", enetaddr);
>
> - /* The CSB337 originally used a version of the MicroMonitor bootloader
> - * which saved Ethernet addresses in the "wrong" order. Operating
> - * systems (like Linux) know this, and apply a workaround. Replicate
> - * that MicroMonitor behavior so we avoid needing to make such OS code
> - * care about which bootloader was used.
> - */
> - if (machine_is_csb337()) {
> - p_mac->EMAC_SA2H = (enetaddr[0] << 8) | (enetaddr[1]);
> - p_mac->EMAC_SA2L = (enetaddr[2] << 24) | (enetaddr[3] << 16)
> - | (enetaddr[4] << 8) | (enetaddr[5]);
> - } else {
> - p_mac->EMAC_SA2L = (enetaddr[3] << 24) | (enetaddr[2] << 16)
> - | (enetaddr[1] << 8) | (enetaddr[0]);
> - p_mac->EMAC_SA2H = (enetaddr[5] << 8) | (enetaddr[4]);
> - }
> + p_mac->EMAC_SA2L = (enetaddr[3] << 24) | (enetaddr[2] << 16)
> + | (enetaddr[1] << 8) | (enetaddr[0]);
> + p_mac->EMAC_SA2H = (enetaddr[5] << 8) | (enetaddr[4]);
>
> p_mac->EMAC_RBQP = (long) (&rbfdt[0]);
> p_mac->EMAC_RSR &= ~(AT91C_EMAC_RSR_OVR | AT91C_EMAC_REC |
> AT91C_EMAC_BNA);
--
Regards,
Igor.
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
