In SPL console is enabled very early where as in U-Boot
it's not. So, SPL can have traces in early init code
while U-Boot can not have it in the same shared code.
Adding a debug print macro that will be defined in SPL
but compiled out in U-Boot.
Also add some useful debug traces throughout SPL
Signed-off-by: Aneesh V <ane...@ti.com>
---
arch/arm/cpu/armv7/omap4/clocks.c | 10 ++++++++--
arch/arm/cpu/armv7/omap4/emif.c | 35 +++++++++++++++++++++++++++--------
arch/arm/include/asm/utils.h | 6 ++++++
spl/board/ti/spl-omap.c | 13 ++++++++++---
4 files changed, 51 insertions(+), 13 deletions(-)
diff --git a/arch/arm/cpu/armv7/omap4/clocks.c
b/arch/arm/cpu/armv7/omap4/clocks.c
index c405b5c..720e60f 100644
--- a/arch/arm/cpu/armv7/omap4/clocks.c
+++ b/arch/arm/cpu/armv7/omap4/clocks.c
@@ -379,7 +379,7 @@ u32 omap4_ddr_clk(void)
core_dpll_params = get_core_dpll_params();
- debug("sys_clk %d\n ", sys_clk_khz * 1000);
+ spl_debug("sys_clk %d\n ", sys_clk_khz * 1000);
/* Find Core DPLL locked frequency first */
ddr_clk = sys_clk_khz * 2 * core_dpll_params->m /
@@ -391,7 +391,7 @@ u32 omap4_ddr_clk(void)
ddr_clk = ddr_clk / 4 / core_dpll_params->m2;
ddr_clk *= 1000; /* convert to Hz */
- debug("ddr_clk %d\n ", ddr_clk);
+ spl_debug("ddr_clk %d\n ", ddr_clk);
return ddr_clk;
}
@@ -400,6 +400,7 @@ static void setup_dplls(void)
{
u32 sysclk_ind, temp;
const struct dpll_params *params;
+ spl_debug("setup_dplls\n");
sysclk_ind = get_sys_clk_index();
@@ -416,10 +417,12 @@ static void setup_dplls(void)
(CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) |
(CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT);
writel(temp, CM_CLKSEL_CORE);
+ spl_debug("Core DPLL configured\n");
/* lock PER dpll */
do_setup_dpll(CM_CLKMODE_DPLL_PER,
&per_dpll_params_1536mhz[sysclk_ind], DPLL_LOCK);
+ spl_debug("PER DPLL locked\n");
/* MPU dpll */
if (omap4_revision() == OMAP4430_ES1_0)
@@ -427,6 +430,7 @@ static void setup_dplls(void)
else
params = &mpu_dpll_params_1ghz[sysclk_ind];
do_setup_dpll(CM_CLKMODE_DPLL_MPU, params, DPLL_LOCK);
+ spl_debug("MPU DPLL locked\n");
}
static void setup_non_essential_dplls(void)
@@ -551,6 +555,7 @@ static void scale_vcores(void)
static void enable_clock_domain(u32 clkctrl_reg, u32 enable_mode)
{
+ spl_debug("Enable clock domain - 0x%08x\n", clkctrl_reg);
modify_reg_32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_SHIFT,
CD_CLKCTRL_CLKTRCTRL_MASK, enable_mode);
}
@@ -570,6 +575,7 @@ static inline void wait_for_clk_enable(u32 clkctrl_addr)
static void enable_clock_module(u32 clkctrl_addr, u32 enable_mode,
u32 wait_for_enable)
{
+ spl_debug("Enable clock module - 0x%08x\n", clkctrl_addr);
modify_reg_32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_SHIFT,
MODULE_CLKCTRL_MODULEMODE_MASK, enable_mode);
if (wait_for_enable)
diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c
index 699a545..fcb6d47 100644
--- a/arch/arm/cpu/armv7/omap4/emif.c
+++ b/arch/arm/cpu/armv7/omap4/emif.c
@@ -34,7 +34,7 @@
DECLARE_GLOBAL_DATA_PTR;
-#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
+#define print_timing_reg(reg) spl_debug(#reg" - 0x%08x\n", (reg))
static u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM;
static u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN;
@@ -237,7 +237,7 @@ s8 addressing_table_index(u8 type, u8 density, u8 width)
else
index = density;
- debug("emif: addressing table index %d\n", index);
+ spl_debug("emif: addressing table index %d\n", index);
return index;
}
@@ -272,7 +272,7 @@ static const struct lpddr2_ac_timings
*get_timings_table(const struct
timings = device_timings[i];
}
}
- debug("emif: timings table: %d\n", freq_nearest);
+ spl_debug("emif: timings table: %d\n", freq_nearest);
return timings;
}
@@ -637,7 +637,7 @@ static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
mr = readl(&emif->emif_lpddr2_mode_reg_data_es2);
else
mr = readl(&emif->emif_lpddr2_mode_reg_data);
- debug("get_mr: EMIF%d cs %d mr %08x val 0x%x\n", emif_num(base),
+ spl_debug("get_mr: EMIF%d cs %d mr %08x val 0x%x\n", emif_num(base),
cs, mr_addr, mr);
return mr;
}
@@ -790,10 +790,10 @@ static void display_sdram_details(u32 emif_nr, u32 cs,
char density_str[10];
u32 density;
- debug("EMIF%d CS%d\t", emif_nr, cs);
+ spl_debug("EMIF%d CS%d\t", emif_nr, cs);
if (!device) {
- debug("None\n");
+ spl_debug("None\n");
return;
}
@@ -807,7 +807,7 @@ static void display_sdram_details(u32 emif_nr, u32 cs,
} else
sprintf(density_str, "%d MB", density);
if (mfg_str && type_str)
- debug("%s\t\t%s\t%s\n", mfg_str, type_str, density_str);
+ spl_debug("%s\t\t%s\t%s\n", mfg_str, type_str, density_str);
}
static u8 is_lpddr2_sdram_present(u32 base, u32 cs,
@@ -948,6 +948,8 @@ static void lpddr2_init(u32 base, const struct emif_regs
*regs)
{
struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+ spl_debug(">>lpddr2_init() %x\n", base);
+
/* Not NVM */
modify_reg_32(&emif->emif_lpddr2_nvm_config,
OMAP44XX_REG_CS1NVMEN_SHIFT, OMAP44XX_REG_CS1NVMEN_MASK, 0);
@@ -978,6 +980,7 @@ static void lpddr2_init(u32 base, const struct emif_regs
*regs)
OMAP44XX_REG_INITREF_DIS_SHIFT,
OMAP44XX_REG_INITREF_DIS_MASK, 0);
+ spl_debug("<<lpddr2_init()\n");
}
static void emif_update_timings(u32 base, const struct emif_regs *regs)
@@ -1023,6 +1026,8 @@ static void do_sdram_init(u32 base)
const struct emif_regs *regs;
u32 in_sdram, emif_nr;
+ spl_debug(">>do_sdram_init() %x\n", base);
+
in_sdram = running_from_sdram();
emif_nr = (base == OMAP44XX_EMIF1) ? 1 : 2;
@@ -1115,6 +1120,8 @@ static void do_sdram_init(u32 base)
/* Write to the shadow registers */
emif_update_timings(base, regs);
+
+ spl_debug("<<do_sdram_init() %x\n", base);
}
void sdram_init_pads(void)
@@ -1187,7 +1194,7 @@ static void dmm_init(u32 base)
sys_addr = CONFIG_SYS_SDRAM_BASE;
emif1_size = emif_sizes[0];
emif2_size = emif_sizes[1];
- debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size);
+ spl_debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size);
if (!emif1_size && !emif2_size)
return;
@@ -1296,11 +1303,14 @@ static void dmm_init(u32 base)
*/
void sdram_init(void)
{
+ spl_debug(">>sdram_init()\n");
+
if (omap4_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_LOADED_BY_SPL)
return;
u32 in_sdram;
in_sdram = running_from_sdram();
+ spl_debug("in_sdram = %d\n", in_sdram);
if (!in_sdram) {
sdram_init_pads();
@@ -1318,4 +1328,13 @@ void sdram_init(void)
/* for the shadow registers to take effect */
freq_update_core();
+
+ /* Do some basic testing */
+ writel(0xDEADBEEF, CONFIG_SYS_SDRAM_BASE);
+ if (readl(CONFIG_SYS_SDRAM_BASE) == 0xDEADBEEF)
+ spl_debug("SDRAM Init success!\n");
+ else
+ printf("SDRAM Init failed!!\n");
+
+ spl_debug("<<sdram_init()\n");
}
diff --git a/arch/arm/include/asm/utils.h b/arch/arm/include/asm/utils.h
index d581539..3e847c1 100644
--- a/arch/arm/include/asm/utils.h
+++ b/arch/arm/include/asm/utils.h
@@ -25,6 +25,12 @@
#ifndef _UTILS_H_
#define _UTILS_H_
+#if defined(DEBUG) && defined(CONFIG_PRELOADER)
+#define spl_debug(fmt, args...) printf(fmt, ##args)
+#else
+#define spl_debug(fmt, args...)
+#endif
+
/* extract a bit field from a bit vector */
#define get_bit_field(nr, start, mask)\
(((nr) & (mask)) >> (start))
diff --git a/spl/board/ti/spl-omap.c b/spl/board/ti/spl-omap.c
index 81ca0d3..6db3675 100644
--- a/spl/board/ti/spl-omap.c
+++ b/spl/board/ti/spl-omap.c
@@ -27,6 +27,7 @@
*/
#include <common.h>
#include <asm/u-boot.h>
+#include <asm/utils.h>
#include <asm/arch/sys_proto.h>
#include <mmc.h>
#include <fat.h>
@@ -45,7 +46,9 @@ typedef void (*u_boot_entry_t)(void)__attribute__
((noreturn));
void board_init_f(ulong dummy)
{
+ debug(">>board_init_f()\n");
relocate_code(CONFIG_SYS_SPL_STACK, &gdata, CONFIG_SYS_SPL_TEXT_BASE);
+ debug("<<board_init_f()\n");
}
inline void hang(void)
@@ -145,11 +148,13 @@ static void mmc_load_uboot(u32 mmc_dev)
}
boot_mode = omap_boot_mode();
- if (boot_mode == MMCSD_MODE_RAW)
+ if (boot_mode == MMCSD_MODE_RAW) {
+ spl_debug("boot mode - RAW\n");
mmc_load_uboot_raw(mmc, mmc_dev);
- else if (boot_mode == MMCSD_MODE_FAT)
+ } else if (boot_mode == MMCSD_MODE_FAT) {
+ spl_debug("boot mode - FAT\n");
mmc_load_uboot_fat(mmc);
- else {
+ } else {
puts("spl: wrong MMC boot mode\n");
hang();
}
@@ -159,6 +164,7 @@ void board_init_r(gd_t *id, ulong dummy)
{
u32 boot_device;
u_boot_entry_t u_boot_entry = (u_boot_entry_t) CONFIG_SYS_TEXT_BASE;
+ spl_debug(">>spl:board_init_r()\n");
timer_init();
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
@@ -166,6 +172,7 @@ void board_init_r(gd_t *id, ulong dummy)
switch (boot_device) {
case BOOT_DEVICE_MMC1:
case BOOT_DEVICE_MMC2:
+ spl_debug("boot device - MMC2\n");
mmc_load_uboot(boot_device - BOOT_DEVICE_MMC1);
break;
default:
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
