On 05/13/2011 10:41 AM, Jason Liu wrote: >> The patch adds several functions that are strictly related to the >> processor and I am checking with the reference manuals to understand >> them. I need more time for it. > > If that, can we consider that I just add the basic mx53loco support: > which exclude: > > Dialog PMIC support, which is just useful to increase the CPU to 1GHZ, > by default voltage, > CPU can only run up to 800MHZ, > > clock code(patch 1/3) , which is just useful to increase DDR run up to > 400Mhz, by default it's 333Mhz. > > I just don't want to break the basic mx53loco board support to > mainline for so-long time. > > Please advise, thanks,
If you prefer to proceed in this way, no problem at all, we can do it. You can add support for clock/dialog later. In the meantime I will send to you my feedback for the clock patch. Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
