On 21.11.24 17:22, Andreas Schwab wrote:
On Nov 21 2024, Heinrich Schuchardt wrote:
On 13.11.24 11:31, Andreas Schwab wrote:
"Error reading cluster" is the new error.
U-Boot SPL 2025.01-rc2 (Nov 08 2024 - 07:13:26 +0000)
DDR version: dc2e84f0.
Trying to boot from MMC2
U-Boot 2025.01-rc2 (Nov 08 2024 - 07:13:26 +0000)
CPU: sifive,u74-mc
Model: StarFive VisionFive 2 v1.2A
DRAM: 4 GiB
Core: 136 devices, 26 uclasses, devicetree: board
WDT: Not starting watchdog@13070000
MMC: mmc@16010000: 0, mmc@16020000: 1
Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256
Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment
StarFive EEPROM format v2
--------EEPROM INFO--------
Vendor : StarFive Technology Co., Ltd.
Product full SN: VF7110A1-2249-D004E000-00000408
data version: 0x2
PCB revision: 0xa1
BOM revision: A
Ethernet MAC0 address: 6c:cf:39:00:16:8d
Ethernet MAC1 address: 6c:cf:39:00:16:8e
--------EEPROM INFO--------
starfive_7110_pcie pcie@2b000000: Starfive PCIe bus probed.
starfive_7110_pcie pcie@2c000000: Starfive PCIe bus probed.
In: serial@10000000
Out: serial@10000000
Err: serial@10000000
Net: eth0: ethernet@16030000, eth1: ethernet@16040000
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Working FDT set to ff72ca10
Hit any key to stop autoboot: 0
Card did not respond to voltage select! : -110
** Booting bootflow '<NULL>' with efi_mgr
Error reading cluster
This is a message from the FAT file system driver.
The file system is ok when read after interrupting the boot.
That ls works does not mean that the file system is not corrupted.
dosfsck will tell you if there is something wrong.
StarFive # mmc dev 1
switch to partitions #0, OK
mmc1 is current device
StarFive # ls mmc 1:1
EFI/
304 ubootefi.var
1 file(s), 1 dir(s)
StarFive # ls mmc 1:1 EFI
./
../
BOOT/
0 file(s), 3 dir(s)
StarFive # ls mmc 1:1 EFI/BOOT
./
../
167936 BOOTRISCV64.EFI
164 grub.cfg
2 file(s), 2 dir(s)
But running boot will end with the above error, and mmc 1 no longer
works.
Which image reproduces the problem?
I've built U-Boot here
<https://build.opensuse.org/project/show/home:Andreas_Schwab:riscv:u-boot>.
I was asking which SD-card image that was used, e.g. some Suse
preinstalled image.
Best regards
Heinrich
