On Nov 21 2024, Heinrich Schuchardt wrote:
> On 13.11.24 11:31, Andreas Schwab wrote:
>> "Error reading cluster" is the new error.
>> U-Boot SPL 2025.01-rc2 (Nov 08 2024 - 07:13:26 +0000)
>> DDR version: dc2e84f0.
>> Trying to boot from MMC2
>> U-Boot 2025.01-rc2 (Nov 08 2024 - 07:13:26 +0000)
>> CPU: sifive,u74-mc
>> Model: StarFive VisionFive 2 v1.2A
>> DRAM: 4 GiB
>> Core: 136 devices, 26 uclasses, devicetree: board
>> WDT: Not starting watchdog@13070000
>> MMC: mmc@16010000: 0, mmc@16020000: 1
>> Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size
>> 256 Bytes, erase size 4 KiB, total 16 MiB
>> *** Warning - bad CRC, using default environment
>> StarFive EEPROM format v2
>> --------EEPROM INFO--------
>> Vendor : StarFive Technology Co., Ltd.
>> Product full SN: VF7110A1-2249-D004E000-00000408
>> data version: 0x2
>> PCB revision: 0xa1
>> BOM revision: A
>> Ethernet MAC0 address: 6c:cf:39:00:16:8d
>> Ethernet MAC1 address: 6c:cf:39:00:16:8e
>> --------EEPROM INFO--------
>> starfive_7110_pcie pcie@2b000000: Starfive PCIe bus probed.
>> starfive_7110_pcie pcie@2c000000: Starfive PCIe bus probed.
>> In: serial@10000000
>> Out: serial@10000000
>> Err: serial@10000000
>> Net: eth0: ethernet@16030000, eth1: ethernet@16040000
>> starting USB...
>> Bus xhci_pci: Register 5000420 NbrPorts 5
>> Starting the controller
>> USB XHCI 1.00
>> scanning bus xhci_pci for devices... 2 USB Device(s) found
>> scanning usb for storage devices... 0 Storage Device(s) found
>> Working FDT set to ff72ca10
>> Hit any key to stop autoboot: 0
>> Card did not respond to voltage select! : -110
>> ** Booting bootflow '<NULL>' with efi_mgr
>> Error reading cluster
>
> This is a message from the FAT file system driver.
The file system is ok when read after interrupting the boot.
StarFive # mmc dev 1
switch to partitions #0, OK
mmc1 is current device
StarFive # ls mmc 1:1
EFI/
304 ubootefi.var
1 file(s), 1 dir(s)
StarFive # ls mmc 1:1 EFI
./
../
BOOT/
0 file(s), 3 dir(s)
StarFive # ls mmc 1:1 EFI/BOOT
./
../
167936 BOOTRISCV64.EFI
164 grub.cfg
2 file(s), 2 dir(s)
But running boot will end with the above error, and mmc 1 no longer
works.
> Which image reproduces the problem?
I've built U-Boot here
<https://build.opensuse.org/project/show/home:Andreas_Schwab:riscv:u-boot>.
--
Andreas Schwab, SUSE Labs, sch...@suse.de
GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7
"And now for something completely different."
