"Error reading cluster" is the new error.
U-Boot SPL 2025.01-rc2 (Nov 08 2024 - 07:13:26 +0000)
DDR version: dc2e84f0.
Trying to boot from MMC2
U-Boot 2025.01-rc2 (Nov 08 2024 - 07:13:26 +0000)
CPU: sifive,u74-mc
Model: StarFive VisionFive 2 v1.2A
DRAM: 4 GiB
Core: 136 devices, 26 uclasses, devicetree: board
WDT: Not starting watchdog@13070000
MMC: mmc@16010000: 0, mmc@16020000: 1
Loading Environment from SPIFlash... SF: Detected gd25lq128 with page size 256
Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment
StarFive EEPROM format v2
--------EEPROM INFO--------
Vendor : StarFive Technology Co., Ltd.
Product full SN: VF7110A1-2249-D004E000-00000408
data version: 0x2
PCB revision: 0xa1
BOM revision: A
Ethernet MAC0 address: 6c:cf:39:00:16:8d
Ethernet MAC1 address: 6c:cf:39:00:16:8e
--------EEPROM INFO--------
starfive_7110_pcie pcie@2b000000: Starfive PCIe bus probed.
starfive_7110_pcie pcie@2c000000: Starfive PCIe bus probed.
In: serial@10000000
Out: serial@10000000
Err: serial@10000000
Net: eth0: ethernet@16030000, eth1: ethernet@16040000
starting USB...
Bus xhci_pci: Register 5000420 NbrPorts 5
Starting the controller
USB XHCI 1.00
scanning bus xhci_pci for devices... 2 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Working FDT set to ff72ca10
Hit any key to stop autoboot: 0
Card did not respond to voltage select! : -110
** Booting bootflow '<NULL>' with efi_mgr
Error reading cluster
Loading Boot0000 'mmc 1' failed
EFI boot manager: Cannot load any image
Boot failed (err=-14)
Card did not respond to voltage select! : -110
--
Andreas Schwab, SUSE Labs, sch...@suse.de
GPG Key fingerprint = 0196 BAD8 1CE9 1970 F4BE 1748 E4D4 88E3 0EEA B9D7
"And now for something completely different."
