On 18/11/2024 15:59, Caleb Connolly wrote:
Hi Neil,
On 11/18/24 15:41, Neil Armstrong wrote:
Add support for GCC in X1E80100, and enable it in qcom_defconfig
Thanks for sending this!
In my testing so far on the Yoga Slim 7x UART doesn't seem to work correctly
unless I skip the UART init sequence, and in that case on Tx works.
Seeing as it works on the CRD, I'm not sure what the cause is here...
Could you dump the clocks on the Yoga Slim 7x?
Neil
Signed-off-by: Neil Armstrong <neil.armstr...@linaro.org>
---
Neil Armstrong (2):
clk: qcom: Add X1E80100 clock driver
qcom_defconfig: enable X1E80100 clock driver
configs/qcom_defconfig | 1 +
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clock-x1e80100.c | 348 ++++++++++++++++++++++++++++++++++++++
4 files changed, 358 insertions(+)
---
base-commit: 56accc56b9aab87ef4809ccc588e1257969cd271
change-id: 20241118-topic-x1e80100-clk-d05b8f0fe1e9
Best regards,