Hi Neil,

On 11/18/24 15:41, Neil Armstrong wrote:
Add support for GCC in X1E80100, and enable it in qcom_defconfig

Thanks for sending this!

In my testing so far on the Yoga Slim 7x UART doesn't seem to work correctly unless I skip the UART init sequence, and in that case on Tx works.

Seeing as it works on the CRD, I'm not sure what the cause is here...



Signed-off-by: Neil Armstrong <neil.armstr...@linaro.org>
---
Neil Armstrong (2):
       clk: qcom: Add X1E80100 clock driver
       qcom_defconfig: enable X1E80100 clock driver

  configs/qcom_defconfig            |   1 +
  drivers/clk/qcom/Kconfig          |   8 +
  drivers/clk/qcom/Makefile         |   1 +
  drivers/clk/qcom/clock-x1e80100.c | 348 ++++++++++++++++++++++++++++++++++++++
  4 files changed, 358 insertions(+)
---
base-commit: 56accc56b9aab87ef4809ccc588e1257969cd271
change-id: 20241118-topic-x1e80100-clk-d05b8f0fe1e9

Best regards,

Reply via email to