Dear Andreas Bießmann,
> This series do some cleanup all avr32 boards. This series is on top of 'Get
> AVR32 boards working with partial linking' rebased to
> u-boot-atmel/rework110202.
>
> In summary the board specific config.mk and u-boot.lds files are deleted in
> favor of a version at architecture level. Theses files had all the same
> content cause they where pure copies of the atstk100x ones.
>
> I have splitted the patches to each board cause some of them should be
> actively maintained and the respectively maintainer should have a chance to
> give some feedback.
>
> Andreas Bießmann (15):
> avr32/config.mk: simplify PLATFORM_RELFLAGS
> avr32: use single linker script
> atngw100: fix "#define XXXX 1"
> atstk1002: fix "#define XXXX 1"
> atstk1003: fix "#define XXXX 1"
> atstk1004: fix "#define XXXX 1"
> atstk1006: fix "#define XXXX 1"
> favr-32-ezkit: fix "#define XXXX 1"
> hammerhead: fix "#define XXXX 1"
> mimc200: fix "#define XXXX 1"
> atngw100: move CONFIG_SYS_TEXT_BASE to header
> atstk100x: move CONFIG_SYS_TEXT_BASE to header
> favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to header
> mimc200: move CONFIG_SYS_TEXT_BASE to header
> hammerhead: move CONFIG_SYS_TEXT_BASE to header
>
> arch/avr32/config.mk | 4 +
> .../atmel/atstk1000 => arch/avr32/cpu}/u-boot.lds | 0
> board/atmel/atngw100/config.mk | 2 -
> board/atmel/atngw100/u-boot.lds | 72
> --------------------
> board/atmel/atstk1000/config.mk | 3 -
> board/earthlcd/favr-32-ezkit/config.mk | 3 -
> board/earthlcd/favr-32-ezkit/u-boot.lds | 70 -------------------
> board/mimc/mimc200/config.mk | 2 -
> board/mimc/mimc200/u-boot.lds | 72
> --------------------
> board/miromico/hammerhead/config.mk | 2 -
> board/miromico/hammerhead/u-boot.lds | 72
> --------------------
> include/configs/atngw100.h | 55 ++++++++-------
> include/configs/atstk1002.h | 49 +++++++-------
> include/configs/atstk1003.h | 43 ++++++------
> include/configs/atstk1004.h | 43 ++++++------
> include/configs/atstk1006.h | 49 +++++++-------
> include/configs/favr-32-ezkit.h | 47 +++++++------
> include/configs/hammerhead.h | 49 +++++++-------
> include/configs/mimc200.h | 57 ++++++++--------
> 19 files changed, 204 insertions(+), 490 deletions(-)
> rename {board/atmel/atstk1000 => arch/avr32/cpu}/u-boot.lds (100%)
> delete mode 100644 board/atmel/atngw100/config.mk
> delete mode 100644 board/atmel/atngw100/u-boot.lds
> delete mode 100644 board/atmel/atstk1000/config.mk
> delete mode 100644 board/earthlcd/favr-32-ezkit/config.mk
> delete mode 100644 board/earthlcd/favr-32-ezkit/u-boot.lds
> delete mode 100644 board/mimc/mimc200/config.mk
> delete mode 100644 board/mimc/mimc200/u-boot.lds
> delete mode 100644 board/miromico/hammerhead/config.mk
> delete mode 100644 board/miromico/hammerhead/u-boot.lds
Some of the patches did not apply. What did apply is now found in
u-boot-atmel/next2.
I have no idea why they do not apply, since the AVR32 part has not changed
since 110202.
Can you please rebase the series against next or resubmit the failed parts
against next2?
Best Regards,
Reinhard
reinhard@sieb:~/embedded/u-boot-atmel$ git am U-Boot-2-3-avr32-fix-linking.patch
Applying avr32: fix linking
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-01-15-avr32-config.mk-simplify-PLATFORM_RELFLAGS.patch
Applying avr32/config.mk: simplify PLATFORM_RELFLAGS
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-02-15-avr32-use-single-linker-script.patch
Applying avr32: use single linker script
error: patch failed: board/atmel/atngw100/u-boot.lds:1
error: board/atmel/atngw100/u-boot.lds: patch does not apply
error: patch failed: board/earthlcd/favr-32-ezkit/u-boot.lds:1
error: board/earthlcd/favr-32-ezkit/u-boot.lds: patch does not apply
error: patch failed: board/mimc/mimc200/u-boot.lds:1
error: board/mimc/mimc200/u-boot.lds: patch does not apply
error: patch failed: board/miromico/hammerhead/u-boot.lds:1
error: board/miromico/hammerhead/u-boot.lds: patch does not apply
Patch failed at 0001.
When you have resolved this problem run "git-am --resolved".
If you would prefer to skip this patch, instead run "git-am --skip".
reinhard@sieb:~/embedded/u-boot-atmel$ git am --skip
Nothing to do.
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-03-15-atngw100-fix-define-XXXX-1.patch
Applying atngw100: fix "#define XXXX 1"
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-04-15-atstk1002-fix-define-XXXX-1.patch
Applying atstk1002: fix "#define XXXX 1"
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-05-15-atstk1003-fix-define-XXXX-1.patch
Applying atstk1003: fix "#define XXXX 1"
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-06-15-atstk1004-fix-define-XXXX-1.patch
Applying atstk1004: fix "#define XXXX 1"
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-07-15-atstk1006-fix-define-XXXX-1.patch
Applying atstk1006: fix "#define XXXX 1"
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-08-15-favr-32-ezkit-fix-define-XXXX-1.patch
Applying favr-32-ezkit: fix "#define XXXX 1"
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-09-15-hammerhead-fix-define-XXXX-1.patch
Applying hammerhead: fix "#define XXXX 1"
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-10-15-mimc200-fix-define-XXXX-1.patch
Applying mimc200: fix "#define XXXX 1"
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-11-15-atngw100-move-CONFIG_SYS_TEXT_BASE-to-header.patch
Applying atngw100: move CONFIG_SYS_TEXT_BASE to header
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-12-15-atstk100x-move-CONFIG_SYS_TEXT_BASE-to-header.patch
Applying atstk100x: move CONFIG_SYS_TEXT_BASE to header
error: patch failed: board/atmel/atstk1000/config.mk:1
error: board/atmel/atstk1000/config.mk: patch does not apply
Patch failed at 0001.
When you have resolved this problem run "git-am --resolved".
If you would prefer to skip this patch, instead run "git-am --skip".
reinhard@sieb:~/embedded/u-boot-atmel$ git am --skip
Nothing to do.
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-13-15-favr-32-ezkit-move-CONFIG_SYS_TEXT_BASE-to-header.patch
Applying favr-32-ezkit: move CONFIG_SYS_TEXT_BASE to header
error: patch failed: board/earthlcd/favr-32-ezkit/config.mk:1
error: board/earthlcd/favr-32-ezkit/config.mk: patch does not apply
Patch failed at 0001.
When you have resolved this problem run "git-am --resolved".
If you would prefer to skip this patch, instead run "git-am --skip".
reinhard@sieb:~/embedded/u-boot-atmel$ git am --skip
Nothing to do.
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-14-15-mimc200-move-CONFIG_SYS_TEXT_BASE-to-header.patch
Applying mimc200: move CONFIG_SYS_TEXT_BASE to header
reinhard@sieb:~/embedded/u-boot-atmel$ git am
U-Boot-15-15-hammerhead-move-CONFIG_SYS_TEXT_BASE-to-header.patch
Applying hammerhead: move CONFIG_SYS_TEXT_BASE to header
reinhard@sieb:~/embedded/u-boot-atmel$
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
