Re: [PATCH 05/19] ARM: dts: stm32: Add alternate pinmux for MP13 I2C5 pins

[Patrice CHOTARD]

On 4/22/24 01:16, Marek Vasut wrote:
> Add another mux option for I2C5 pins, this is used on
> DH electronics STM32MP13xx DHCOR DHSBC board.
> 
> Signed-off-by: Marek Vasut <ma...@denx.de>
> ---
> Cc: Patrice Chotard <patrice.chot...@foss.st.com>
> Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
> Cc: u-b...@dh-electronics.com
> Cc: uboot-st...@st-md-mailman.stormreply.com
> ---
>  arch/arm/dts/stm32mp13-pinctrl.dtsi | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi 
> b/arch/arm/dts/stm32mp13-pinctrl.dtsi
> index 899f0f98e1a..cfbae71efc7 100644
> --- a/arch/arm/dts/stm32mp13-pinctrl.dtsi
> +++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi
> @@ -151,6 +151,23 @@
>               };
>       };
>  
> +     i2c5_pins_b: i2c5-1 {
> +             pins {
> +                     pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */
> +                              <STM32_PINMUX('E', 13, AF4)>; /* I2C5_SDA */
> +                     bias-disable;
> +                     drive-open-drain;
> +                     slew-rate = <0>;
> +             };
> +     };
> +
> +     i2c5_sleep_pins_b: i2c5-sleep-1 {
> +             pins {
> +                     pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */
> +                              <STM32_PINMUX('E', 13, ANALOG)>; /* I2C5_SDA */
> +             };
> +     };
> +
>       mcp23017_pins_a: mcp23017-0 {
>               pins {
>                       pinmux = <STM32_PINMUX('G', 12, GPIO)>;

Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>

Thanks
Patrice