[PATCH 05/19] ARM: dts: stm32: Add alternate pinmux for MP13 I2C5 pins

[Marek Vasut]

Add another mux option for I2C5 pins, this is used on
DH electronics STM32MP13xx DHCOR DHSBC board.

Signed-off-by: Marek Vasut <ma...@denx.de>
---
Cc: Patrice Chotard <patrice.chot...@foss.st.com>
Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
Cc: u-b...@dh-electronics.com
Cc: uboot-st...@st-md-mailman.stormreply.com
---
 arch/arm/dts/stm32mp13-pinctrl.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi 
b/arch/arm/dts/stm32mp13-pinctrl.dtsi
index 899f0f98e1a..cfbae71efc7 100644
--- a/arch/arm/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi
@@ -151,6 +151,23 @@
                };
        };
 
+       i2c5_pins_b: i2c5-1 {
+               pins {
+                       pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */
+                                <STM32_PINMUX('E', 13, AF4)>; /* I2C5_SDA */
+                       bias-disable;
+                       drive-open-drain;
+                       slew-rate = <0>;
+               };
+       };
+
+       i2c5_sleep_pins_b: i2c5-sleep-1 {
+               pins {
+                       pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */
+                                <STM32_PINMUX('E', 13, ANALOG)>; /* I2C5_SDA */
+               };
+       };
+
        mcp23017_pins_a: mcp23017-0 {
                pins {
                        pinmux = <STM32_PINMUX('G', 12, GPIO)>;
-- 
2.43.0