Am Mittwoch, dem 10.01.2024 um 14:35 +0100 schrieb Yannic Moog: > Add brief documentation on how to build a bootable U-Boot image for > the > phyGATE-Tauri-L. > > Signed-off-by: Yannic Moog <y.m...@phytec.de>
Reviewed-by: Teresa Remmet <t.rem...@phytec.de> > --- > board/phytec/phycore_imx8mm/MAINTAINERS | 2 + > doc/board/phytec/imx8mm-phygate-tauri-l.rst | 60 > +++++++++++++++++++++++++++++ > doc/board/phytec/index.rst | 1 + > 3 files changed, 63 insertions(+) > > diff --git a/board/phytec/phycore_imx8mm/MAINTAINERS > b/board/phytec/phycore_imx8mm/MAINTAINERS > index 05d48ba2472..cf6f92c07e5 100644 > --- a/board/phytec/phycore_imx8mm/MAINTAINERS > +++ b/board/phytec/phycore_imx8mm/MAINTAINERS > @@ -10,4 +10,6 @@ F: arch/arm/dts/imx8mm-phygate-tauri-l-u- > boot.dtsi > F: board/phytec/phycore_imx8mm/ > F: configs/imx8mm-phygate-tauri-l_defconfig > F: configs/phycore-imx8mm_defconfig > +F: doc/board/phytec/imx8mm-phygate-tauri-l.rst > +F: doc/board/phytec/index.rst > F: include/configs/phycore_imx8mm.h > diff --git a/doc/board/phytec/imx8mm-phygate-tauri-l.rst > b/doc/board/phytec/imx8mm-phygate-tauri-l.rst > new file mode 100644 > index 00000000000..28b614fd144 > --- /dev/null > +++ b/doc/board/phytec/imx8mm-phygate-tauri-l.rst > @@ -0,0 +1,60 @@ > +.. SPDX-License-Identifier: GPL-2.0+ > + > +phyGATE-Tauri-L-i.MX 8M Mini > +============================ > + > +The phyGATE-Tauri-L-i.MX 8M Mini with 2GB of main memory is > supported. > + > +Quick Start > +----------- > + > +- Build the ARM Trusted firmware binary > +- Get ddr firmware > +- Build U-Boot > +- Boot > + > +Build the ARM Trusted firmware binary > +------------------------------------- > + > +.. code-block:: bash > + > + $ git clone > https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git > + $ cd trusted-firmware-a > + $ export CROSS_COMPILE=aarch64-linux-gnu > + $ export IMX_BOOT_UART_BASE=0x30880000 > + $ make PLAT=imx8mm bl31 > + > +Get the ddr firmware > +-------------------- > + > +.. code-block:: bash > + > + $ wget > https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.23.bin > + $ chmod +x firmware-imx-8.23.bin > + $ ./firmware-imx-8.23.bin > + > +Build U-Boot for SD card > +------------------------ > + > +Copy binaries > +^^^^^^^^^^^^^ > + > +.. code-block:: bash > + > + $ cp <TF-A dir>/build/imx8mm/release/bl31.bin . > + $ cp firmware-imx-8.23/firmware/ddr/synopsys/lpddr4*.bin . > + > +Build U-Boot > +^^^^^^^^^^^^ > + > +.. code-block:: bash > + > + $ make imx8mm-phygate-tauri-l_defconfig > + $ make flash.bin > + > +Flash SD card > +^^^^^^^^^^^^^ > + > +.. code-block:: bash > + > + $ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=sync > diff --git a/doc/board/phytec/index.rst b/doc/board/phytec/index.rst > index a5b442045ed..9996bce9741 100644 > --- a/doc/board/phytec/index.rst > +++ b/doc/board/phytec/index.rst > @@ -6,5 +6,6 @@ PHYTEC > .. toctree:: > :maxdepth: 2 > > + imx8mm-phygate-tauri-l > phycore-imx8mm > phycore-imx8mp > -- PHYTEC Messtechnik GmbH | Barcelona-Allee 1 | 55129 Mainz, Germany Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber, Dipl.-Ing. (FH) Markus Lickes | Handelsregister Mainz HRB 4656 | Finanzamt Mainz | St.Nr. 266500608, DE 149059855