The config is minimal and mostly a copy from the phycore-imx8mm. SPI
(flash) is disabled as it is not populated by default.
Also add documentation for the phyGATE-Tauri-L board. While at it, add
the other PHYTEC doc files to MAINTAINERS; they were missing for
existing phycore-imx8m{m,p} doc.
---
Changes in v2:
- readd TIDP83867; is populated on the SoM by default
- remove remnants from SPI config options (savedefconfig)
- add doc/board/phytec files to MAINTAINERS
---
Yannic Moog (3):
Add support for phyGATE-Tauri-L-iMX8MM
doc: board: phytec: Add phyGATE-Tauri board documentation
board: phytec: MAINTAINERS: add missing phytec doc files
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx8mm-phygate-tauri-l-u-boot.dtsi | 70 ++++
arch/arm/dts/imx8mm-phygate-tauri-l.dts | 489 ++++++++++++++++++++++++
board/phytec/phycore_imx8mm/MAINTAINERS | 6 +
board/phytec/phycore_imx8mp/MAINTAINERS | 1 +
configs/imx8mm-phygate-tauri-l_defconfig | 115 ++++++
doc/board/phytec/imx8mm-phygate-tauri-l.rst | 60 +++
doc/board/phytec/index.rst | 1 +
8 files changed, 743 insertions(+)
---
base-commit: c5e461fbf7cc72f0c1c8a79226b6a5170e56cb4d
change-id: 20231220-wip-y-moog-phytec-de-tauri-l_upstream-08c9648ac653
Best regards,
--
Yannic Moog <y.m...@phytec.de>
