On 2011/03/26 8:32 AM, Aaron Williams wrote: > I am still doing some testing and just added a fix today so that if a flash > chip that supports both 8 and 16-bits is on an 8-bit bus the interface is set > to 8-bits. I'll try and get patches out next week. > > So far it's working fairly well on all of our boards, most of which have an 8- > bit bus but one has a 16-bit bus. I had to change all of the defined > addresses > for AMD parts and calculate the 16 and 32-bit addresses by applying a mask. > > The CFI code *should* work if there's an 8-bit part on a 16-bit bus, but it > probably will not support two 8-bit parts in parallel. That should be doable > with some work. > > -Aaron
Hi Aaron, I'm looking forward to seeing your patches. With any luck, they'll also work on my board, and a nasty hack can go away. :-) Regards, Rogan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
