On 2011/03/24 5:07 AM, Aaron Williams wrote: > I have it working on our 8-bit boards properly now, though I've only done > some > limited testing. > > I basically put in the correct addresses into cfi_flash.h and updated various > addresses for 8-bit support. The problem was that the CFI code was written > using the 16-bit addresses which don't work for an 8-bit bus. > > I added a mask which is used to calculate the correct address for 16 and 32- > bit busses. I have only been able to test with 8-bit and 16-bit Spansion > devices though. > > -Aaron
Hi Aaron, I'm happy to test it, when you post the patch. Regards, Rogan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
