On 2011/03/19 9:19 AM, Heiko Schocher wrote: >> Marvell>> bootm >> ## Booting image at 00100000 ... >> Image Name: UBoot dns323 >> Image Type: ARM U-Boot Kernel Image (uncompressed) >> Data Size: 170100 Bytes = 166.1 kB >> Load Address: 03000000 >> Entry Point: 03000000 >> Verifying Checksum ... OK >> OK >> >> Starting kernel ... > > With relocation, you must set TEXT_BASE to the value you start > the image, so please try to set TEXT_BASE = load_addr. > > Also, if you do a ram image, don;t forget that with relocation > the u-boot image gets relocated to the end of ram, so don;t choose > a TEXT_BASE near the end of ram. > > If that not helps, you maybe need a debugger ... > > bye, > Heiko
Hi Heiko, I did see that, and thought it might have something to do with it. I also tried building a version with the TEXT_BASE at 0x100000, but had exactly the same result. It sounds like a debugger will be my only option. Fortunately, I should be getting a Segger J-Link JTAG adapter on Tuesday, and then maybe I can figure out what is going on. Regards, Rogan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
