Hello Rogan, ro...@dawes.za.net wrote: > From: Rogan Dawes <ro...@dawes.za.net> > > Based on that of the edminiv2, with a few additions [...] > diff --git a/board/D-Link/dns323_b1/config.mk > b/board/D-Link/dns323_b1/config.mk > new file mode 100644 > index 0000000..ce6760d > --- /dev/null > +++ b/board/D-Link/dns323_b1/config.mk > @@ -0,0 +1,28 @@ > +# > +# Copyright (C) 2010 Albert ARIBAUD <albert.arib...@free.fr> > +# > +# (C) Copyright 2009 > +# Marvell Semiconductor <www.marvell.com> > +# Written-by: Prafulla Wadaskar <prafu...@marvell.com> > +# > +# See file CREDITS for list of people who contributed to this > +# project. > +# > +# This program is free software; you can redistribute it and/or > +# modify it under the terms of the GNU General Public License as > +# published by the Free Software Foundation; either version 2 of > +# the License, or (at your option) any later version. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > +# GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write to the Free Software > +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, > +# MA 02110-1301 USA > +# > + > +# TEXT_BASE must equal the intended FLASH location of u-boot. > +CONFIG_SYS_TEXT_BASE = 0xfffd0000
You also wrote: > Unfortunately, this does not boot at all. I get: > > Marvell>> bootm > ## Booting image at 00100000 ... > Image Name: UBoot dns323 > Image Type: ARM U-Boot Kernel Image (uncompressed) > Data Size: 170100 Bytes = 166.1 kB > Load Address: 03000000 > Entry Point: 03000000 > Verifying Checksum ... OK > OK > > Starting kernel ... With relocation, you must set TEXT_BASE to the value you start the image, so please try to set TEXT_BASE = load_addr. Also, if you do a ram image, don;t forget that with relocation the u-boot image gets relocated to the end of ram, so don;t choose a TEXT_BASE near the end of ram. If that not helps, you maybe need a debugger ... bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot