On 16:46-20230929, Roger Quadros wrote:
> CPSW node needs PHY, MDIO, pinmux, DMA and INTC nodes.
> Mark them as 'bootph-all' so they are available in all
> pre-relocation phases.
> 
> Fixes below dts warnings:
> 
> <stdout>: Warning (reg_format): 
> /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1:reg: property has invalid 
> length (4 bytes) (#address-cells == 2, #size-cells == 1)
> <stdout>: Warning (unit_address_vs_reg): 
> /bus@f4000/ethernet@8000000/mdio@f00: node has a unit name, but no reg or 
> ranges property
> <stdout>: Warning (pci_device_reg): Failed prerequisite 'reg_format'
> <stdout>: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
> <stdout>: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
> <stdout>: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
> <stdout>: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
> <stdout>: Warning (avoid_default_addr_size): 
> /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1: Relying on default 
> #address-cells value
> <stdout>: Warning (avoid_default_addr_size): 
> /bus@f4000/ethernet@8000000/mdio@f00/ethernet-phy@1: Relying on default 
> #size-cells value
> <stdout>: Warning (avoid_unnecessary_addr_size): Failed prerequisite 
> 'avoid_default_addr_size'
> <stdout>: Warning (unique_unit_address): Failed prerequisite 
> 'avoid_default_addr_size'
> <stdout>: Warning (msi_parent_property): 
> /bus@f4000/bus@48000000/dma-controller@485c0100:msi-parent: Could not get 
> phandle node for (cell 0)
> <stdout>: Warning (msi_parent_property): 
> /bus@f4000/bus@48000000/dma-controller@485c0000:msi-parent: Could not get 
> phandle node for (cell 0)
> <stdout>: Warning (phys_property): 
> /bus@f4000/ethernet@8000000/ethernet-ports/port@2:phys: Could not get phandle 
> node for (cell 0)
> 
> Signed-off-by: Roger Quadros <rog...@kernel.org>
> ---
>  arch/arm/dts/k3-am642-sk-u-boot.dtsi | 36 ++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/arch/arm/dts/k3-am642-sk-u-boot.dtsi 
> b/arch/arm/dts/k3-am642-sk-u-boot.dtsi
> index 5599977f6c..40a53df0b0 100644
> --- a/arch/arm/dts/k3-am642-sk-u-boot.dtsi
> +++ b/arch/arm/dts/k3-am642-sk-u-boot.dtsi
> @@ -92,6 +92,38 @@
>       bootph-all;
>  };
>  
> +&inta_main_dmss {
> +     bootph-all;
> +};
> +
> +&main_pktdma {
> +     bootph-all;
> +};
> +
> +&mdio1_pins_default {
> +     bootph-all;
> +};
> +
> +&cpsw3g_mdio {
> +     bootph-all;
> +};
> +
> +&cpsw3g_phy0 {
> +     bootph-all;
> +};
> +
> +&cpsw3g_phy1 {
> +     bootph-all;
> +};
> +
> +&rgmii1_pins_default {
> +     bootph-all;
> +};
> +
> +&rgmii2_pins_default {
> +     bootph-all;
> +};
> +
>  &cpsw3g {
>       bootph-all;
>  
> @@ -100,6 +132,10 @@
>       };
>  };
>  
> +&phy_gmii_sel {
> +     bootph-all;
> +};
> +
>  &cpsw_port2 {
>       bootph-all;
>  };
> -- 
> 2.34.1
> 
Reviewed-by: Nishanth Menon <n...@ti.com>

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 
849D 1736 249D

Reply via email to