Get rid of k3-j721e-r5-*-u-boot.dtsi as it is not
necessary. Change the inclusion hierarchy to be as follows:
k3-j721e-<board>.dts---
-
-->k3-j721e-r5-<board>.dts
-
k3-j721e-<board>-u-boot.dtsi---
Reason for explicitly mentioning the inclusion of -u-boot.dtsi in code
although it could've been automatically done by U-Boot is to resolve
some of the dependencies that R5 file requires.
Also remove duplicate phandles while making this shift as well as remove
firmware-loader as it serves no purpose without "phandlepart" property.
Signed-off-by: Neha Malcom Francis <n-fran...@ti.com>
---
.../k3-j721e-r5-common-proc-board-u-boot.dtsi | 29 ------------
.../arm/dts/k3-j721e-r5-common-proc-board.dts | 38 +++------------
arch/arm/dts/k3-j721e-r5-sk-u-boot.dtsi | 31 ------------
arch/arm/dts/k3-j721e-r5-sk.dts | 47 ++++---------------
4 files changed, 16 insertions(+), 129 deletions(-)
delete mode 100644 arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi
delete mode 100644 arch/arm/dts/k3-j721e-r5-sk-u-boot.dtsi
diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi
b/arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi
deleted file mode 100644
index f9746d33ec..0000000000
--- a/arch/arm/dts/k3-j721e-r5-common-proc-board-u-boot.dtsi
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#include "k3-j721e-common-proc-board-u-boot.dtsi"
-
-/ {
- chosen {
- firmware-loader = &fs_loader0;
- };
-
- aliases {
- remoteproc0 = &sysctrler;
- remoteproc1 = &a72_0;
- };
-
- fs_loader0: fs_loader@0 {
- bootph-all;
- compatible = "u-boot,fs-loader";
- };
-};
-
-&tps659413a {
- esm: esm {
- compatible = "ti,tps659413-esm";
- bootph-pre-ram;
- };
-};
diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
index 32f71e9b6a..7bb5ce775c 100644
--- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
+++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
@@ -5,10 +5,10 @@
/dts-v1/;
-#include "k3-j721e-som-p0.dtsi"
+#include "k3-j721e-common-proc-board.dts"
#include "k3-j721e-ddr-evm-lp4-4266.dtsi"
#include "k3-j721e-ddr.dtsi"
-#include "k3-j721e-binman.dtsi"
+#include "k3-j721e-common-proc-board-u-boot.dtsi"
#include <dt-bindings/phy/phy-cadence.h>
/ {
@@ -198,27 +198,6 @@
>;
};
- main_usbss0_pins_default: main_usbss0_pins_default {
- pinctrl-single,pins = <
- J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS
*/
- J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3)
MCAN1_RX.GPIO1_3 */
- >;
- };
-
- main_mmc1_pins_default: main_mmc1_pins_default {
- pinctrl-single,pins = <
- J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
- J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
- J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
- J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
- J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
- J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
- J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
- J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
- J721E_IOPAD(0x25c, PIN_INPUT, 0) /* (R28) MMC1_SDWP */
- >;
- };
-
main_i2c0_pins_default: main-i2c0-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5)
I2C0_SCL */
@@ -300,6 +279,11 @@
bootph-pre-ram;
};
};
+
+ esm: esm {
+ compatible = "ti,tps659413-esm";
+ bootph-pre-ram;
+ };
};
};
@@ -424,14 +408,6 @@
assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>, <&serdes0
CDNS_SIERRA_PLL_CMNLC1>;
assigned-clock-parents = <&wiz0_pll1_refclk>, <&wiz0_pll1_refclk>;
- serdes0_pcie_link: link@0 {
- reg = <0>;
- cdns,num-lanes = <1>;
- #phy-cells = <0>;
- cdns,phy-type = <PHY_TYPE_PCIE>;
- resets = <&serdes_wiz0 1>;
- };
-
serdes0_qsgmii_link: phy@1 {
reg = <1>;
cdns,num-lanes = <1>;
diff --git a/arch/arm/dts/k3-j721e-r5-sk-u-boot.dtsi
b/arch/arm/dts/k3-j721e-r5-sk-u-boot.dtsi
deleted file mode 100644
index 733d69cd00..0000000000
--- a/arch/arm/dts/k3-j721e-r5-sk-u-boot.dtsi
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
- */
-
-#include "k3-j721e-sk-u-boot.dtsi"
-
-/ {
- chosen {
- firmware-loader = &fs_loader0;
- };
-
- aliases {
- remoteproc0 = &sysctrler;
- remoteproc1 = &a72_0;
- remoteproc2 = &main_r5fss0_core0;
- remoteproc3 = &main_r5fss0_core1;
- };
-
- fs_loader0: fs_loader@0 {
- bootph-all;
- compatible = "u-boot,fs-loader";
- };
-};
-
-&tps659412 {
- esm: esm {
- compatible = "ti,tps659413-esm";
- bootph-pre-ram;
- };
-};
diff --git a/arch/arm/dts/k3-j721e-r5-sk.dts b/arch/arm/dts/k3-j721e-r5-sk.dts
index 6986292e37..1cc64d07f7 100644
--- a/arch/arm/dts/k3-j721e-r5-sk.dts
+++ b/arch/arm/dts/k3-j721e-r5-sk.dts
@@ -5,9 +5,10 @@
/dts-v1/;
-#include "k3-j721e.dtsi"
+#include "k3-j721e-sk.dts"
#include "k3-j721e-ddr-sk-lp4-4266.dtsi"
#include "k3-j721e-ddr.dtsi"
+#include "k3-j721e-sk-u-boot.dtsi"
/ {
model = "Texas Instruments J721E SK R5";
@@ -15,6 +16,8 @@
aliases {
remoteproc0 = &sysctrler;
remoteproc1 = &a72_0;
+ remoteproc2 = &main_r5fss0_core0;
+ remoteproc3 = &main_r5fss0_core1;
};
chosen {
@@ -279,52 +282,15 @@
J721E_WKUP_IOPAD(0x8, PIN_INPUT, 0) /* (D21)
MCU_OSPI0_DQS */
>;
};
-
- mcu_i2c0_pins_default: mcu_i2c0_pins_default {
- pinctrl-single,pins = <
- J721E_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (J26)
MCU_I2C0_SCL */
- J721E_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (H25)
MCU_I2C0_SDA */
- >;
- };
};
&main_pmx0 {
- main_uart0_pins_default: main_uart0_pins_default {
- bootph-pre-ram;
- pinctrl-single,pins = <
- J721E_IOPAD(0x1f0, PIN_INPUT, 0) /* (AC2) UART0_CTSn */
- J721E_IOPAD(0x1f4, PIN_OUTPUT, 0) /* (AB1) UART0_RTSn */
- J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */
- J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */
- >;
- };
-
- main_usbss0_pins_default: main_usbss0_pins_default {
- pinctrl-single,pins = <
- J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS
*/
- J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3)
MCAN1_RX.GPIO1_3 */
- >;
- };
-
main_usbss1_pins_default: main-usbss1-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4)
MCAN1_TX.USB1_DRVVBUS */
>;
};
- main_mmc1_pins_default: main_mmc1_pins_default {
- pinctrl-single,pins = <
- J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */
- J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */
- J721E_IOPAD(0x2ac, PIN_INPUT, 0) /* (P25) MMC1_CLKLB */
- J721E_IOPAD(0x24c, PIN_INPUT, 0) /* (R24) MMC1_DAT0 */
- J721E_IOPAD(0x248, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */
- J721E_IOPAD(0x244, PIN_INPUT, 0) /* (R25) MMC1_DAT2 */
- J721E_IOPAD(0x240, PIN_INPUT, 0) /* (R26) MMC1_DAT3 */
- J721E_IOPAD(0x258, PIN_INPUT, 0) /* (P23) MMC1_SDCD */
- >;
- };
-
main_i2c0_pins_default: main-i2c0-pins-default {
pinctrl-single,pins = <
J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5)
I2C0_SCL */
@@ -423,6 +389,11 @@
bootph-pre-ram;
};
};
+
+ esm: esm {
+ compatible = "ti,tps659413-esm";
+ bootph-pre-ram;
+ };
};
};
--
2.34.1
