On Mon, May 22, 2023 at 3:49 PM Fabio Estevam <feste...@gmail.com> wrote: > > Hi Tim, > > On Fri, May 19, 2023 at 8:00 PM Tim Harvey <thar...@gateworks.com> wrote: > > > Fabio, > > > > There's more to be done here also. With this patch, and with the > > spba-bus added to u-boot.dtsi, if you try to enable usb (usb start) > > you get: > > starting USB... > > Bus usb@38200000: > > Enable clock-controller@30380000 failed > > probe failed, error -2 > > No working controllers found > > > > So until we get this figured out please don't apply this. > > I don't have any imx8mp-based board here to debug this problem, so it > would be nice > if someone else could investigate this.
I can do some testing on the imx8mp-beacon board, but it will likely be a few days before I can get to it. adam > > Thanks
