On Thu, Apr 27, 2023 at 3:56 PM Tim Harvey <thar...@gateworks.com> wrote:
> Fabio, > > This causes a hang on imx8mm boards when usbotg2 (usb@32e50000) is > enabled. You can re-create this on the imx8mm-evk with: I am able to reproduce the hang after enabling usbotg2, but this hang is not caused by the imx8mm.dtsi sync. The hang also happens if I revert the imx8mm.dtsi sync. The usbotg2 is a different issue. > Note the imx8mm-evk does have the 2nd host controller but its > currently not enabled due to missing bits to deal with the USB 3.0 > GPIO controlled mux. > > Is there perhaps a corresponding change necessary in the > imx8m-power-domain driver? I haven't checked, but yes, it is very likely some imx8m-power-domain changes are needed.
