for more information about this chip, please check:
http://www.asix.com.tw/products.php?op=pItemdetail&PItemID=98;65;86&PLine=65
Signed-off-by: Joe Xue <lg...@hotmail.com>
---
README | 7 +++++++
drivers/net/Makefile | 1 +
include/netdev.h | 1 +
3 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/README b/README
index 755d17c..c9657d8 100644
--- a/README
+++ b/README
@@ -892,6 +892,13 @@ The following options need to be configured:
automatically converts one 32 bit word to two 16 bit
words you may also try CONFIG_SMC911X_32_BIT.
+ CONFIG_DRIVER_AX88783
+ Support for ASIX's AX88783 chip
+
+ CONFIG_AX88783_BASE
+ Define this to hold the physical address
+ of the device (I/O space)
+
- USB Support:
At the moment only the UHCI host controller is
supported (PIP405, MIP405, MPC5200); define
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index fd9d0b4..7cd6e2c 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -30,6 +30,7 @@ COBJS-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
COBJS-$(CONFIG_ALTERA_TSE) += altera_tse.o
COBJS-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o
+COBJS-$(CONFIG_DRIVER_AX88783) += ax88783.o
COBJS-$(CONFIG_BCM570x) += bcm570x.o
COBJS-$(CONFIG_BCM570x) += bcm570x_autoneg.o
COBJS-$(CONFIG_BCM570x) += 5701rls.o
diff --git a/include/netdev.h b/include/netdev.h
index 1a542e8..fddc64d 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -44,6 +44,7 @@ int cpu_eth_init(bd_t *bis);
int altera_tse_initialize(u8 dev_num, int mac_base,
int sgdma_rx_base, int sgdma_tx_base);
int ax88180_initialize(bd_t *bis);
+int ax88783_initialize(bd_t *bis);
int au1x00_enet_initialize(bd_t*);
int at91emac_register(bd_t *bis, unsigned long iobase);
int bfin_EMAC_initialize(bd_t *bis);
--
1.7.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
