Hello all, My name is Erwan Grâce, I'm French. Here's my issue : I had loaded the Flash memory of an electronic card with 2 RAMdisk which are supposed to be the same. However, when I checked the messages displayed on a screen at boot time, I observed that there were some differences between the 2 RAMdisk :
Messages displayed for the 1st RAMdisk : ## Booting image at ffb00000 ... Image Name: Linux-2.6.10_mvlcge401-8560ads Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1662041 Bytes = 1.6 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at fc100000 ... Image Name: tcifl.ramdisk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 42466734 Bytes = 40.5 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 15780000, end 17fffdae ... OK Messages displayed for the 2nd RAMdisk : ## Booting image at ffb00000 ... Image Name: Linux-2.6.10_mvlcge401-8560ads Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1662041 Bytes = 1.6 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading RAMDisk Image at fc100000 ... Image Name: tcifl.ramdisk Image Type: PowerPC Linux RAMDisk Image (gzip compressed) Data Size: 42451540 Bytes = 40.5 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Ramdisk to 15783000, end 17fff254 ... OK As you can notice, the 2 RAMdisk seem to be different but I don't know why. I just observe that they have different size and they are not loaded at the same address in RAM memory. I precise that I didn't build this RAMdisk. Can someone help me to understand what is the root cause of these differences, please ? Thank you very much for your help. Best regards, Erwan Grâce
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot