List some common boot modes and their corresponding switch
settings for AM62 SK.
Signed-off-by: Judith Mendez <j...@ti.com>
---
Changes from v1: Change table format from ascii-art to list-table
doc/board/ti/am62x_sk.rst | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst
index b1b7d99befb..3d85400b1a1 100644
--- a/doc/board/ti/am62x_sk.rst
+++ b/doc/board/ti/am62x_sk.rst
@@ -229,3 +229,39 @@ Image formats:
| | SPL DTB 1...N | |
| +-------------------+ |
+-----------------------+
+
+Switch Setting for Boot Mode
+----------------------------
+
+Boot Mode pins provide means to select the boot mode and options before the
+device is powered up. After every POR, they are the main source to populate
+the Boot Parameter Tables.
+
+The following table shows some common boot modes used on AM62 platform. More
+details can be found in the Technical Reference Manual:
+https://www.ti.com/lit/pdf/spruiv7 under the `Boot Mode Pins` section.
+
+.. list-table:: Boot Modes
+ :widths: 32 32 32
+ :header-rows: 1
+
+ * - Switch Label
+ - SW2: 12345678
+ - SW3: 12345678
+ * - SD
+ - 01000000
+ - 11000010
+ * - OSPI
+ - 00000000
+ - 11001110
+ * - EMMC
+ - 00000000
+ - 11010010
+ * - UART
+ - 00000000
+ - 11011100
+ * - USB DFU
+ - 00000000
+ - 11001010
+
+For SW2 and SW1, the switch state in the "ON" position = 1.
--
2.17.1
