From: Stefan Herbrechtsmeier <stefan.herbrechtsme...@weidmueller.com>
This reverts commit e09784728689de7949d4cdd559a9590e0bfcc702. The commit wrongly divides the dummy bytes by dummy bus width to calculate the dummy bytes. The framework already converts the dummy cycles to the number of bytes and the controller use the SPI flash command to determine the dummy cycles via the address width. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsme...@weidmueller.com> --- drivers/spi/zynq_qspi.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/spi/zynq_qspi.c b/drivers/spi/zynq_qspi.c index 00e3ffcd1d..d1d4048966 100644 --- a/drivers/spi/zynq_qspi.c +++ b/drivers/spi/zynq_qspi.c @@ -676,7 +676,6 @@ static int zynq_qspi_exec_op(struct spi_slave *slave, const struct spi_mem_op *op) { int op_len, pos = 0, ret, i; - u32 dummy_bytes = 0; unsigned int flag = 0; const u8 *tx_buf = NULL; u8 *rx_buf = NULL; @@ -689,11 +688,6 @@ static int zynq_qspi_exec_op(struct spi_slave *slave, } op_len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes; - if (op->dummy.nbytes) { - op_len = op->cmd.nbytes + op->addr.nbytes + - op->dummy.nbytes / op->dummy.buswidth; - dummy_bytes = op->dummy.nbytes / op->dummy.buswidth; - } u8 op_buf[op_len]; @@ -707,8 +701,8 @@ static int zynq_qspi_exec_op(struct spi_slave *slave, pos += op->addr.nbytes; } - if (dummy_bytes) - memset(op_buf + pos, 0xff, dummy_bytes); + if (op->dummy.nbytes) + memset(op_buf + pos, 0xff, op->dummy.nbytes); /* 1st transfer: opcode + address + dummy cycles */ /* Make sure to set END bit if no tx or rx data messages follow */ -- 2.30.2 ________________________________ Kommanditgesellschaft - Sitz: Detmold - Amtsgericht Lemgo HRA 2790 - Komplementärin: Weidmüller Interface Führungsgesellschaft mbH - Sitz: Detmold - Amtsgericht Lemgo HRB 3924; Geschäftsführer: Dr. Timo Berger, Volker Bibelhausen, Dr. Sebastian Durst, André Sombecki; USt-ID-Nr. DE124599660