Hi Albert,
The following changes since commit d6a5e6d531e357dd8016141f73d370d02886a7eb:
Cleanup .boards.depend when using an objtree (2011-01-21 08:56:50 +0100)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
Liu Hui-R64343 (8):
MX51EVK: UART does not print out the early information
MX5: Add initial support for MX53 processor
fec_mxc: add support for MX53 processor
serial_mxc: add support for MX53 processor
mxc_gpio: add support for MX53 processor
mxc_i2c: add support for MX53 processor
fsl_pmic: add I2C interface support
MX5:MX53: add initial support for MX53EVK board
Marek Vasut (1):
BLOCK: Add freescale IMX51 PATA driver
Stefano Babic (1):
mxc_nand: add support for i.MX35 processor
MAINTAINERS | 4 +
arch/arm/cpu/armv7/mx5/iomux.c | 30 ++-
arch/arm/cpu/armv7/mx5/lowlevel_init.S | 91 +++---
arch/arm/cpu/armv7/mx5/soc.c | 22 +-
arch/arm/include/asm/arch-mx5/asm-offsets.h | 5 +
arch/arm/include/asm/arch-mx5/imx-regs.h | 82 ++---
arch/arm/include/asm/arch-mx5/iomux.h | 102 ------
arch/arm/include/asm/arch-mx5/mx5x_pins.h | 469
++++++++++++++++++++++++++-
board/freescale/mx51evk/mx51evk.c | 11 +-
board/freescale/mx53evk/Makefile | 48 +++
board/freescale/mx53evk/config.mk | 24 ++
board/freescale/mx53evk/imximage.cfg | 112 +++++++
board/freescale/mx53evk/mx53evk.c | 397 +++++++++++++++++++++++
boards.cfg | 1 +
drivers/block/Makefile | 1 +
drivers/block/mxc_ata.c | 149 +++++++++
drivers/gpio/mxc_gpio.c | 9 +-
drivers/i2c/mxc_i2c.c | 21 +-
drivers/misc/fsl_pmic.c | 45 +++-
drivers/mtd/nand/mxc_nand.c | 6 +-
drivers/net/fec_mxc.c | 2 +-
drivers/net/fec_mxc.h | 4 +-
drivers/serial/serial_mxc.c | 6 +
include/configs/mx51evk.h | 5 +-
include/configs/mx53evk.h | 193 +++++++++++
include/configs/vision2.h | 3 +-
include/mc13892.h | 5 +
27 files changed, 1620 insertions(+), 227 deletions(-)
mode change 100644 => 100755 arch/arm/cpu/armv7/mx5/iomux.c
mode change 100644 => 100755 arch/arm/cpu/armv7/mx5/lowlevel_init.S
mode change 100644 => 100755 arch/arm/include/asm/arch-mx5/imx-regs.h
mode change 100644 => 100755 arch/arm/include/asm/arch-mx5/mx5x_pins.h
create mode 100755 board/freescale/mx53evk/Makefile
create mode 100755 board/freescale/mx53evk/config.mk
create mode 100644 board/freescale/mx53evk/imximage.cfg
create mode 100755 board/freescale/mx53evk/mx53evk.c
create mode 100644 drivers/block/mxc_ata.c
mode change 100644 => 100755 drivers/i2c/mxc_i2c.c
mode change 100644 => 100755 include/configs/mx51evk.h
create mode 100755 include/configs/mx53evk.h
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
