Le 13/01/2011 07:40, Stefano Babic a écrit : > Hi Wolfgang, > > The following changes since commit cdc51c294ad33879c4e57edf4c9d2155381b1d59: > > Merge branch 'next' of ../next (2010-12-22 21:16:17 +0100) > > are available in the git repository at: > > git://www.denx.de/git/u-boot-imx.git master > > Liu Hui-R64343 (9): > MX51EVK: UART does not print out the early information > MX5: Add initial support for MX53 processor > fec_mxc: add support for MX53 processor > serial_mxc: add support for MX53 processor > mxc_gpio: add support for MX53 processor > mxc_i2c: add support for MX53 processor > fsl_pmic: add I2C interface support > imximage: Add MX53 boot image support > MX5:MX53: add initial support for MX53EVK board > > MAINTAINERS | 4 + > arch/arm/cpu/armv7/mx5/iomux.c | 30 ++- > arch/arm/cpu/armv7/mx5/lowlevel_init.S | 91 +++--- > arch/arm/cpu/armv7/mx5/soc.c | 22 +- > arch/arm/include/asm/arch-mx5/asm-offsets.h | 5 + > arch/arm/include/asm/arch-mx5/imx-regs.h | 82 ++--- > arch/arm/include/asm/arch-mx5/iomux.h | 102 ------ > arch/arm/include/asm/arch-mx5/mx5x_pins.h | 469 > ++++++++++++++++++++++++++- > board/freescale/mx51evk/mx51evk.c | 11 +- > board/freescale/mx53evk/Makefile | 48 +++ > board/freescale/mx53evk/config.mk | 24 ++ > board/freescale/mx53evk/imximage.cfg | 112 +++++++ > board/freescale/mx53evk/mx53evk.c | 397 +++++++++++++++++++++++ > boards.cfg | 1 + > doc/README.imximage | 12 +- > drivers/gpio/mxc_gpio.c | 9 +- > drivers/i2c/mxc_i2c.c | 21 +- > drivers/misc/fsl_pmic.c | 45 +++- > drivers/net/fec_mxc.c | 2 +- > drivers/net/fec_mxc.h | 4 +- > drivers/serial/serial_mxc.c | 6 + > include/configs/mx51evk.h | 5 +- > include/configs/mx53evk.h | 193 +++++++++++ > include/configs/vision2.h | 3 +- > include/mc13892.h | 5 + > tools/imximage.c | 421 +++++++++++++++++++----- > tools/imximage.h | 110 +++++-- > 27 files changed, 1900 insertions(+), 334 deletions(-) > mode change 100644 => 100755 arch/arm/cpu/armv7/mx5/iomux.c > mode change 100644 => 100755 arch/arm/cpu/armv7/mx5/lowlevel_init.S > mode change 100644 => 100755 arch/arm/include/asm/arch-mx5/imx-regs.h > mode change 100644 => 100755 arch/arm/include/asm/arch-mx5/mx5x_pins.h > create mode 100755 board/freescale/mx53evk/Makefile > create mode 100755 board/freescale/mx53evk/config.mk > create mode 100644 board/freescale/mx53evk/imximage.cfg > create mode 100755 board/freescale/mx53evk/mx53evk.c > mode change 100644 => 100755 drivers/i2c/mxc_i2c.c > mode change 100644 => 100755 include/configs/mx51evk.h > create mode 100755 include/configs/mx53evk.h
I think I should be the one doing the pull as the ARM custodian. I'll be doing it this evening. Amicalement, -- Albert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
