Hi Oliver and Stefano, On Tue, Nov 8, 2022 at 1:43 PM Stefano Babic <sba...@denx.de> wrote:
> I have tried to merge the series, but I get build errors, see: > > https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/519510 > > Could you take a look ? One problem I noticed is the missing CONFIG_TEXT_BASE conversion: diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi index 3507489a813c..442e64badc39 100644 --- a/arch/arm/dts/imx8qm-u-boot.dtsi +++ b/arch/arm/dts/imx8qm-u-boot.dtsi @@ -50,7 +50,7 @@ arch = "arm64"; compression = "none"; description = "U-Boot (64-bit)"; - load = <CONFIG_SYS_TEXT_BASE>; + load = <CONFIG_TEXT_BASE>; type = "standalone"; uboot-blob { diff --git a/arch/arm/dts/imx8qxp-u-boot.dtsi b/arch/arm/dts/imx8qxp-u-boot.dtsi index 01183f8ade63..e8df5bb8bfea 100644 --- a/arch/arm/dts/imx8qxp-u-boot.dtsi +++ b/arch/arm/dts/imx8qxp-u-boot.dtsi @@ -50,7 +50,7 @@ arch = "arm64"; compression = "none"; description = "U-Boot (64-bit)"; - load = <CONFIG_SYS_TEXT_BASE>; + load = <CONFIG_TEXT_BASE>; type = "standalone"; uboot-blob { With this fix applied, I got: WARNING './ahab-container.img' not found, resulting binary is not-functional make[1]: Nothing to be done for 'SPL'. BINMAN all binman: Error 1 running 'mkimage -d ./mkimage.spl.mkimage -n spl/u-boot-spl.cfgout -T imx8image -e 0x100000 ./mkimage-out.spl.mkimage': Fail open first container file ahab-container.img make: *** [Makefile:1116: all] Error 1 but if I manually copy the firmware, then the build succeeds. binman should not thrown an error in case of missing firmware. Oliver, any ideas? Also, some boards use ahab-container.img and others use mx8qxc0-ahab-container.img. Is it OK to use mx8qxc0-ahab-container.img for all of them?
